462213
31
Zoom out
Zoom in
Previous page
1/46
Next page
The babycall symbol appears on the display.
When you press a button (except the set button ), the programmed babycall num-
ber is dialled automatically.
8.9.3. DEACTIVATE BABYCALL
1 xxxx 40
The babycall symbol disappears from the display.
8.10. KEY TONE ON/OFF
Standard the Butler 200 is set to sound a beep each time you push a button. This can
be deactivated as follows:
1 xxxx 50
To activate the key tones again, proceed as follows:
1 xxxx 51
8.11. 15 MINUTES CONVERSATION TIMER
To avoid that you would forget to end a conversation or that you accidentally press
the line button without having a conversation, you have the possibility to activate a
15 minutes conversation timer. This warns you after 15 minutes of conversation by
means of 10 beeps. To continue your conversation and to avoid the connection from
being broken automatically, press a numerical button (0-9) as soon as you hear the
first beeps.
To activate this function, proceed as follows:
1 xxxx 31
This function can also be deactivated again in the following way:
1 xxxx 30
8.12. SETTING PAUSE TIME
I
2 xxxx 31
(for 1 second pause time)
2 xxxx 32
(for 2 seconds pause time)
2 xxxx 33
(for 3 seconds pause time)
2 xxxx 34
(for 4 seconds pause time)
If you wish to insert a pause when saving a memory number, just press the rediall
button . The pause will last as long as you have programmed it to be.
8.13. SETTING RINGER VOLUME
The ringer volume of the base station can be set by means of a ringer volume switch
on the right side of the base station. This switch allows you to set the volume
(position I= silent,position II= normal, position III= loud).
8.14. PAGING
With this function you can call the handset from the base station and vice versa.
Paging from base station to handset:
Press the paging button of the base station. The handset emits a ringer sound and
“INT” appears on the display during 20 seconds.
Press the line button to answer the internal call by means of 2 beeps. If you press the
line button again, the internal call is broken.
You can also call the base station from the handset. Proceed as follows:
5
16 17
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom Butler 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom Butler 200 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info