484000
10
Zoom out
Zoom in
Previous page
1/121
Next page
Babytalker 1020
8
®
7 Technical data
8 Cleaning and maintenance
This chapter contains important information about cleaning and maintaining the device.
Follow the instructions in order to avoid damage due to incorrect cleaning of the device and to ensure that it
continues to work properly.
8.1 Safety instructions
8.2 Cleaning
- Use a soft, damp cloth to clean the device.
- Use a soft brush to clean dirty connections and contacts.
- Use a dry, lint-free cloth to clean battery contacts and the battery compartment.
- If the device becomes wet, switch it off and remove the batteries immediately.
Dry the battery compartment with a soft cloth to minimise potential water damage.
Leave the cover off the battery compartment overnight or until completely dry.
Wait until the device is completely dry before using it again.
8.3 Maintenance
- Check and replace the batteries in the device regularly.
- Check connections and cables to make sure they are working.
Channels
Sub-code
Frequency
Range
Transmission Power
Modulation Type
Channel spacing
Batteries
Power Adapter
8
DCS
446.00625MHz - 446.09375 MHz
Up to 2 Km (Open field)
=< 500mW ERP
FM - F3E
12,5 kHz
Baby Unit: 3 x AAA ‘LR03’ Alkaline batteries
Parent Unit: Battery pack (3 x AAA Ni-MH batteries)
Baby Unit: Input: 230-240V~ 50Hz / Output: DC 7,5V/300mA
Parent Unit: Input: 230-240V~ 50Hz / Output: DC 7,5V/300mA
DANGER
Danger to life due to electrical current!
Switch off the device and unplug it from the mains before cleaning.
WARNING
Danger due to leaking battery acid!
If the batteries are leaking, the fluid that emerges can cause injury (skin irritation) or can damage the
device.
• Wear protective gloves.
WARNING
Do not use cleaning agents or solvents. These can damage the case and leak inside, causing
permanent damage.
DANGER
Danger to life due to electrical current!
Unplug the device from the mains before starting to deal with problems.
WARNING
Repairs that are not carried out properly can be dangerous and can damage the device.!
Do not attempt to adjust or repair the device.
The device or cables should only be repaired by a specialist in the service centre.
If you suspect that the device is damaged (for instance, if someone has dropped it), take it to a
specialist to be checked before using it again.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom Babytalker 1020 - KS-4212 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom Babytalker 1020 - KS-4212 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 38,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Topcom Babytalker 1020 - KS-4212

Topcom Babytalker 1020 - KS-4212 User Manual - Dutch - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info