484000

Topcom Babytalker 1020 - KS-4212 Manual

9
Zoom out
Zoom in
Previous page
1/121
Next page
7
Babytalker 1020
®
ENGLISH
6.3 Activating privacy mode
The Babytalker 1020 operates on free frequencies (PMR - 446Mhz).
Any other PMR device in range, on the same channel can hear the transmitted babyphone signal.
This means also that the parents’ unit can receive the signal from other PMR devices.
To avoid disturbance from other PMR devices, privacy mode must be activated on both parents’ and baby unit.
Once the channel on the parents’ unit and baby unit is the same,
- Press the set button once to activate privacy mode on the parent unit.
- Press the set button once to activate privacy mode on the baby unit.
6.4 Setting the transmission volume of the parents' unit
There are 8 volume levels.
- Press the button to increase the volume.
- Press the button to decrease the volume.
6.5 Setting microphone sensitivity (VOX)
The baby unit operates on VOX mode. This means that the baby unit starts sending as soon as the microphone
detects sound. The sensitivity of the sound detection can be changed by the user.
When you increase the sensitivity, the baby unit picks up quieter sounds.
The VOX sensitivity can be adjusted by turning the VOX sensitivity switch ;
- Clockwise to the highest VOX sensitivity position
- Counter clockwise to the lowest VOX sensitivity position
6.6 Feeding timer
The feeding timer is a count down timer that can be used for generating an alarm sound to remind you of the next
feeding or medicine time.
To turn on the count down timer and set the timer.
- Press and hold the set button for 5 seconds. The feeding timer icon and feeding time interval
is displayed.
- Press the channel up button to select the hour.
- Press the channel up button to select the minutes.
- Press the set button to confirm.
Once the alarm is audible, press any button (except the On/Off button) to deactivate.
6.7 Night light on the baby unit
- Press the night light button to activate the LED night light .
- Press the night light button again to deactivate the LED night light .
6.8 LED light on the parents’ unit
- Press the LED light button to activate the LED light .
- Press the LED light button again to deactivate the LED light .
IMPORTANT:
When the baby unit is transmitting (TX on the display), the channel cannot be
set. The channel up or channel down button will not respond.
Make sure that the VOX sensitivity switch is set to minimum (Counter clockwise)
and make no excessive sounds while setting the channel of the baby unit.
• When privacy mode is activated, is displayed.
• To deactivate the feeding timer during the countdown, enter this menu function
again and reset the hour and minutes to zero.
32
15 16
24
10
17
8
6
24
10
3
4
10
20 21
20 21
5
2
5
2
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom Babytalker 1020 - KS-4212 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom Babytalker 1020 - KS-4212 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 38,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Topcom Babytalker 1020 - KS-4212

Topcom Babytalker 1020 - KS-4212 User Manual - Dutch - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info