782362

Toolson KGZ2550PRO Manual

22
Zoom out
Zoom in
Previous page
1/296
Next page
22 GB
12 Secure the workpiece
–Use the clamping devices or a vice to hold the
workpiece in place. In this manner, it is held more
securely than with your hand.
–An additional support is necessary for long work-
pieces (table, trestle, etc.) in order to prevent the
machine from tipping over.
–Always press the workpiece rmly against the
working plate and stop in order to prevent bounc-
ing and twisting of the workpiece.
13 Avoid abnormal posture
–Make sure that you have secure footing and always
maintain your balance.
–Avoid awkward hand positions in which a sudden
slip could cause one or both hands to come into
contact with the saw blade.
14 Take care of your tools
–Keep cutting tools sharp and clean in order to be
able to work better and more safely.
–Follow the instructions for lubrication and for tool
replacement.
–Check the connection cable of the electric tool
regularly and have it replaced by a recognised
specialist when damaged.
–Check extension cables regularly and replace them
when damaged.
–Keep the handle dry, clean and free of oil and grease.
15 Pull the plug out of the outlet
–Never remove loose splinters, chips or jammed
wood pieces from the running saw blade.
–During non-use of the electric tool or prior to main-
tenance and when replacing tools such as saw
blades, bits, milling heads.
–When the saw blade is blocked due to abnormal
feed force during cutting, turn the machine off and
disconnect it from power supply. Remove the work
piece and ensure that the saw blade runs free. Turn
the machine on and start new cutting operation
with reduced feed force.
16 Do not leave a tool key inserted
–Before switching on, make sure that keys and ad-
justing tools are removed.
17 Avoid inadvertent starting
–Make sure that the switch is switched off when
plugging the plug into an outlet.
18 Use extension cables for outdoors
–Only use approved and appropriately identied
extension cables for use outdoors.
–Only use cable reels in the unrolled state.
19 Remain attentive
–Pay attention to what you are doing. Remain sen-
sible when working. Do not use the electric tool
when you are distracted.
20 Check the electric tool for potential damage
–Protective devices and other parts must be care-
fully inspected to ensure that they are fault-free and
function as intended prior to continued use of the
electric tool.
–Check whether the moving parts function faultless-
ly and do not jam or whether parts are damaged. All
parts must be correctly mounted and all conditions
must be fullled to ensure fault-free operation of
the electric tool.
–The moving protective hood may not be xed in
the open position.
–Damaged protective devices and parts must be
properly repaired or replaced by a recognised
workshop, insofar as nothing different is specied
in the operating manual.
–Damaged switches must be replaced at a customer
service workshop.
–Do not use any faulty or damaged connection ca-
bles.
–Do not use any electric tool on which the switch
cannot be switched on and off.
21 ATTENTION!
–Exercise elevated caution for double mitre cuts.
22 ATTENTION!
–The use of other insertion tools and other acces-
sories can entail a risk of injury.
23 Have your electric tool repaired by a qualied elec-
trician
–This electric tool conforms to the applicable safety
regulations. Repairs may only be performed by an
electrician using original spare parts. Otherwise
accidents can occur.
ADDITIONAL SAFETY INSTRUCTIONS
1 Safety precautions
–Warning! Do not use damaged or deformed saw
blades.
–Replace a worn table insert.
–Only use saw blades recommended by the manu-
facturer which conform to EN 847-1.
–Make sure that a suitable saw blade for the mate-
rial to be cut is selected.
–Wear suitable personal protective equipment. This
includes:
–Hearing protection to avoid the risk of becoming
hearing impaired,
–Respiratory protection to avoid the risk of inhal-
ing harmful dust,
–Wear gloves when handling saw blades and
rough materials. Carry saw blades in a con-
tainer whenever practical.
–Wear goggles. Sparks generated during work or
splinters, chippings and dust coming from the
device can lead to loss of eyesight.
–Connect a dust collecting device to the electric tool
when sawing wood. The emission of dust is inu-
enced, among other things, by the type of material
to be processed, the signicance of local separation
(collection or source) and the correct setting of the
hood/guide plates/guides.
–Do not use saw blades made of high-speed alloy
steel (HSS steel).
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toolson KGZ2550PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toolson KGZ2550PRO in the language / languages: All languages as an attachment in your email.

The manual is 13.89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info