Manual Toolcraft LDM 30 (page 34 of 85) (English, German, Dutch, French)

574412

Zoom out

Zoom in

1/85

e) Area Measurement

The laser distance meter can determine the

area content of an area, e.g. the wall of an

apartment, if you want to calculate the area

of the wallpaper quantity.

Observe that the area to be measured is

rectangular, since the area is calculated by

multiplying the two distances „a“ and „b“.

The measurements therefore must be made

at right angles to each other.

Proceed as follows:

1. Keep the middle function button „ “ (C) pushed until a square appears at the top of the

display (area measurement). Release the button again.

2. Push the measuring button „ “ (B) briey to measure the rst side length (a). The mea-

sured value is shown in the middle line (3). Then the right dash of the square ashes in the

display.

3. Push the measuring button „ “ (B) briey to measure the second side length (b). Observe

that the measurement is performed at a right angle to the rst side length.

After the measurement, the middle line (3) shows the measured value of the second side

length, and the calculated area in m² appears in the lower display line (4) (the complete

square now ashes at the top of the display).

4. If another area measurement is to be performed, briey push the measuring button „ “ (B).

The data are deleted from the display. Now continue with step 2.

Pushing the power button „ “ (D) several times will take you back to the previous

step or leave area measurement.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Toolcraft LDM 30 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Toolcraft LDM 30 Manual

Product: