Manual Toolcraft LDM 30 (page 27 of 85) (English, German, Dutch, French)

574412

Zoom out

Zoom in

1/85

• Do not disassemble the product (except for the procedures described in these

operating instructions for insertion/replacing the batteries).

Maintenance, adjustments and repair work may only be carried out by a specialist/

specialised workshop. Improperly performed maintenance, setting or repair work

may cause dangerous laser irradiation.

• Caution - if proceeding in a different way or using any other controls than those

specied in this manual, you may expose yourself to hazardous radiation.

c) Operation

• The product will be damaged if it becomes damp or wet. Therefore, do not operate

the product in rain, moist operating conditions or in/under water.

• Only operate the product in moderate climate, never in tropical climate. For more

information on acceptable environmental conditions, see the chapter „Technical

Data“.

• Never operate the device immediately after it was taken from a cold room to a warm

room. The resulting condensation may lead to malfunctions or damage!

Let the product reach room temperature before taking it into operation again.

• Protect the product from dust and dirt.

Use the enclosed storage bag when not using the laser distance meter.

• If not used for a longer period (e.g. in case of storage), remove the inserted batteries/

rechargeable batteries. Then keep the product in a clean, dry site, use the enclosed

storage bag.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Toolcraft LDM 30 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Toolcraft LDM 30 Manual

Product: