574412

Toolcraft LDM 30 Manual

28
Zoom out
Zoom in
Previous page
1/85
Next page
28
6. Information on Batteries and Rechargeable
Batteries
• Keep batteries/rechargeable batteries out of the reach of children.
• Ensure that the polarity is correct when inserting the batteries/rechargeable batteries (observe
plus/+ and minus/-).
• Do not leave any batteries/rechargeable batteries lying around openly. There is a risk of batteries
being swallowed by children or pets. If swallowed, consult a doctor immediately; there is danger
to life!
• Batteries/rechargeable batteries must not be short-circuited, opened, disassembled or thrown
into re. There is a risk of re and explosion!
• Chemical uids may leak from old or at rechargeable batteries and damage the device. If not
used for a longer period (e.g. in case of storage), remove the inserted batteries/rechargeable
batteries.
• Leaking or damaged batteries/rechargeable batteries can cause chemical burns to skin at
contact; therefore, use suitable protective gloves.
Liquids leaking from batteries are chemically highly aggressive. Objects or surfaces that come
into contact with them may take severe damage. Therefore, keep batteries/rechargeable batteries
in a suitable location.
• Always replace the whole set of batteries/rechargeable batteries. Do not mix batteries/rechar-
geable batteries with different condition (e.g. fully and partially charged batteries).
• Use either batteries or rechargeable batteries; never mix batteries with rechargeable batteries.
Always use batteries/rechargeable batteries of the same build, type and manufacturer.
Operation with rechargeable batteries is possible. However, the lower voltage (battery
= 1.5 V, rechargeable battery = 1.2 V) causes the operating duration and display
contrast to reduce.
We therefore recommend operating the product with high-quality alkaline batteries to
warrant a long and secure function.
If you want to use rechargeable batteries anyway, we recommend use of NiMH
rechargeable batteries with a low self-discharge.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toolcraft LDM 30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toolcraft LDM 30 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info