748246

Tomado TBM8001W Manual

23
Zoom out
Zoom in
Previous page
1/64
Next page
EN - 23
There are dierent factors that could lead to a poor result when baking bread. Below are a number of examples of poor results
and how to solve this, if possible.
The loaf has collapsed
- If your loaf seems to have collapsed on all sides, this means that the dough was too wet. Try adding a lile less water.
When using conserved fruits or vegetables, rst drain them well and properly wipe them dry before using them. They have
been soaking for a longer period of me, as a result of which they contain excess liquid. You can also try to use a lighter type
of our.
- It can also be a case of excess leavening. The dough has risen so much, that the dough is no longer able to handle the
rise. Try to add a lile less yeast, 1 to 2 grammes less. In this case, it is also possible that the amount of liquid is to blame.
It is possible that you use meal that needs less water than the standard recipes indicate. Try adding 10 to 20 ml less water
the next me.
The loaf is not baked enough in the centre.
- If the inside of the loaf is not baked enough, this could be caused by the type of our used. This usually happens when using
heavier types of our, such as rye our or whole wheat our. Try using one kneading process more when using these types
of our. When the bread maker has stopped the rst kneading process, stop the appliance. Then set the appliance once
more and press start: the appliance starts to knead again, now a larger volume of air has been absorbed in the dough.
- You can also set the crust colour to dark, as a result of which the baking temperature is increased.
The loaf has overspilled
- If your loaf rises higher than normally, this means that you used too much yeast. Check that you used the correct amount and
type of yeast.
- Too much sugar could acvate your yeast too much. Reduce the amount of sugar and also be careful when using fruits
containing a lot of sugar or honey. Try to reduce the amount of water by 10 to 20 ml. Do remember that a lower moisture
content prevents the yeast from being too acve.
- When using a very nely ground our, it is also somemes possible that the loaf rises too much. Compared to heavier
or more coarsely ground types of our, these types of our do not need a very acve yeast to be able to rise.
The loaf is too dry
- Use a lile less our or add 1 tablespoon of liquid. When the bread maker is mixing heavier dough or when it uses longer
kneading mes, it is possible that the machine lightly vibrates on the worktop. Therefore, make sure the appliance
is on a stable surface, not too close to another object and also not too close to the edge of the worktop.
Flat loafs
- When using our ground by the miller or whole wheat our, it is possible that the loaf is a lile more at (not a nice ball).
- If your loaf does not rise at all, you must check the yeast. Have you forgoen to add the yeast? If the loaf has risen only
slightly, it is possible that the yeast was too old.
- Acvaon of the yeast is prevented if the water is too cold or too hot.
- Also check the amount of salt used. Make sure you have not used too much salt.
The appliance is not working
- Is it switched on?
The temperature of the bread maker is too high. Allow the bread maker to cool down before you start it again.
There is smoke coming from the aeraon holes
- Perhaps ingredients have spilled onto the heang element.
The top of the loaf has cracked and looks brown.
- Too much our, yeast or sugar.
Loaf is too small
- Not enough our, yeast, sugar or water was used.
- Whole wheat our was used, or our containing arcial yeast.
- Poor type of yeast was used.
- Flour or yeast was used that was no longer fresh.
Loaf not baked enough
- Stop buon was pressed aer switching on.
- The lid was opened during the baking process.
Part of the loaf is sll covered with our.
- Not enough water was used.
PROBLEMS AND SOLUTIONS
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tomado TBM8001W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tomado TBM8001W in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info