510684
10
Zoom out
Zoom in
Previous page
1/72
Next page
10 – ENGLISH
7. PRESETS 1-5: Press and hold to store the currently tuned station. Press briefly to recall the
station associated with that specific preset. In FM mode, the preset number will be indicated
on the display. There are 5 presets for each band.
8. VOLUME +/–: Press the Volume + button to raise the volume level or the Volume – button to
lower the volume level. If the audio ever sounds distorted, lower the volume level to avoid dam-
aging the speaker. Adjusting the volume while the Model 10+ is muted will cancel the muting.
9. pq/TUNE +/-: Press to adjust menu items. Use these same buttons to manually tune up or
down when in FM mode. A “T” will show on the display to indicate manual tuning mode. Press
and hold to move quickly through the frequencies. It will take a second until the frequencies
begin to change. Press for 1.5 seconds and release to auto scan to the next station detected.
The display will show “Scanning…” Also refer to “Scan Setting” under the section “Menu
and Specific Features”. In DAB mode, use the pq buttons on the remote, or press the Multi-
Function Control Wheel on top of the unit, to show all available DAB/DAB+/DMB stations. Use
the pq buttons or the top control wheel to highlight specific stations. The Station list will
disappear between 7 and 15 seconds depending on whether it was accessed via the Control
Wheel or the remote control.
10. tu: The right arrow button duplicates the Select button. The left arrow button moves you to
the previous page in certain menu items.
11. MENU/SELECT: Press and hold to enter the main menu and press briefly to select items
within the menu. For more, see the section marked “Menu”.
12. BACK: Press to go back to the previous menu page.
13. MONO: Press to change the Stereo/Mono setting. The display will show “M” for mono or
“ST” for stereo. “Mono” or “Stereo” will also be one of the fields shown when pressing the
Info button on the remote in FM mode. This setting also affects the headphone output. For
more, see the section marked “Digital Radio/FM Reception”.
MENU AND SPECIFIC FEATURES
Press and hold the Menu/Select button on the remote to enter the main menu. Use the pq
buttons and the Select button to change the items within the menu. Use the Back button to
navigate back, or wait for 15 seconds until the timeout expires.
An asterics (*) indicates the shown menu item is currently set.
1. SCAN SETTING (FM MODE ONLY): Press the Select button and use pq and Select button
to choose between “Strong stations only” or “All stations” when performing an auto scan (see
#9 (pq/Tune +/-) under “Remote Control”. Selecting “All stations” increases the sensitivity of
the scan, possibly resulting in the auto seek stopping on noise. This feature is not accessible
in Auxiliary mode.
2. TIVOLI EQ: Press the Select button and use pq and Select buttons to adjust the Bass and
Treble. The adjusted values will be shown in “User EQ”. Press the Select button to turn
Loudness On or Off. Turning Loudness on when listening at low volume levels is recommended
since it boosts high and low frequencies resulting in a more natural sound. Use pq and Select
buttons to activate any one of the pre-set EQ settings. Selecting a preset EQ will over-ride
any adjustment made to the Bass and Treble settings, but Loudness will be unaffected. The
“Flat” EQ restores the audio settings to the factory defaults, meaning Bass and Treble will be
re-set to zero. The “Flat” EQ also restores Loudness Off. However, if the Bass and Treble had
been adjusted, those settings will still be shown in “User EQ”. Simply selecting “User EQ” will
reactivate the Bass and Treble settings. In the EQ menu page, the numbers to the right hand
side indicate the bass and treble settings.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tivoli MODEL 10 PLUS Stereo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tivoli MODEL 10 PLUS Stereo in the language / languages: English, German, Danish, French, Norwegian as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info