510684

Tivoli MODEL 10 PLUS Stereo Manual

12
Zoom out
Zoom in
Previous page
1/72
Next page
12 – ENGLISH
7. FACTORY RESET (FOUND UNDER SETTINGS): Press Select and use the pq or tu and
Select buttons to confirm (Yes) or reject (No) the factory reset. A factory reset will restore factory
defaults and cancel all your personal settings, such as presets and language. Also see the
section marked “Digital Radio/FM Reception”.
8. ID (FOUND UNDER SETTINGS): Press Select to view the ID. If you contact your dealer or
Tivoli Audio with a question, you may be asked to provide the number shown in this field.
9. SLEEP (FOUND UNDER SETTINGS): Press Select and use pq and the Select buttons to
set the sleep timer to one of the available times. There is also a dedicated Sleep button on the
remote control. A small clock face will show on the display when the Sleep timer is active.
HOW TO SET THE ALARM
10. With the Model 10+ powered on, Access the alarm setting either through the main menu or by
pressing the alarm button on the remote.
11. Alarm 1 is shown first. Press the Alarm button repeatedly or use the pq and Select buttons
to choose between Alarm 1 and Alarm 2. Note: At any point you can navigate through the alarm
menu by using the Back or left arrow buttons, and the Select or right arrow buttons.
12. Use the pq and Select buttons to set the alarm on or off. If the time and date are not set
the Model 10+ will prompt you to set Time/Date. Otherwise, set the alarm as described in the
next step.
13. Use the pq buttons to set/change the hour, then press Select. Repeat this process to set/
change the minutes, followed by AM/PM (if time is set to 12 hour format), then press Select.
14. Use the pq buttons to select how long you want the alarm to sound, then press Select.
15. Use the pq buttons to select the source you wish to wake to, then press Select. If you set
the source to DAB (includes DAB+/DMB) or FM, use the pq buttons to select the station pre-
set (if presets have been stored) or last listened, then press Select.
16. Use the pq buttons to set how often the alarm should be set to wake, then press Select.
If “Once” is selected, you must set the date you wish the one time alarm to sound.
17. Lastly, use the pq buttons to set the volume level of the alarm, then press Select.
18. Repeat this process for Alarm 2 if desired.
If you make a mistake at any point in the process, press the Back button on the remote and
begin again.
Note: Your settings will not be saved unless you complete the entire process and the display
shows “Alarm Saved”.
Note: If you set the alarm source to DAB and the last listened or preset station is unavailable at
the time the alarm sounds, the alarm will default to the tone.
Power Loss: Should power be lost, or the Model 10+ becomes disconnected, the alarm time
will be saved but the Model 10+ alarm cannot sound if there is no power.
Alarm Quick Set: With the Model 10+ in standby, repeatedly press the alarm button briefly to
toggle each alarm on or off.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tivoli MODEL 10 PLUS Stereo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tivoli MODEL 10 PLUS Stereo in the language / languages: English, German, Danish, French, Norwegian as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info