510684

Tivoli MODEL 10 PLUS Stereo Manual

9
Zoom out
Zoom in
Previous page
1/72
Next page
9 – ENGLISH
stereo output to record the audio. The primary speaker will not be muted when using this
output. This jack accepts a 3.5mm stereo male mini connector.
8. MIX IN: Connect the audio output of another device, such as a computer, to this input to hear
the audio mixed in with the tuner. With the Model 10+ in Auxiliary mode, this input acts as a
second Auxiliary input. This stereo input accepts a 3.5mm stereo male mini connector. The vol-
ume level is controlled by the source device.
9. AUX IN: To hear audio from another device, such as Tivoli Audio’s Model CD, a MP3 player, or
TV, connect said device’s audio output to this stereo input and change the source to Auxiliary.
This stereo input accepts a 3.5mm stereo male mini connector. Note you may need to adjust
the volume level differently for an auxiliary device than the level used for radio listening.
10. SERVICE: The port underneath this label is for use during service only. Do not remove the
“Service” label. Do not connect anything to this port or you could damage the Model 10+ and
void your warranty.
11. POWER CORD INPUT: Firmly insert the included power cord. When unplugging the power
cord from the wall outlet, always grasp it by the plug and not the cord. We recommend the
use of a power strip with surge protection. Be sure your region’s voltage is consistant with the
voltage indicated on the rear panel under the power cord input. Tivoli Audio is not responsible
for damages caused by incorrect voltage.
GUIDE TO FEATURES (REMOTE CONTROL)
1. POWER: Press briefly to power the
Model 10+ off or on. The radio will
power on to the last source used.
2. MUTE/SNOOZE: Press to mute the audio
(the volume bars will disappear from the
icon) while the unit is playing; press again
or adjust the volume to restore sound.
Press to mute the alarm for 7 minutes
after the alarm sounds. A icon will
show on the display when Snooze is ac-
tive. The Snooze time is not adjustable.
3. ALARM: With the Model 10+ powered on,
use the pq and Select buttons to adjust
and set the alarms. For a complete step-
by-step guide, refer to the section titled
“How to set the Alarm.”
4. SLEEP: Press repeatedly to view the
amount of time the radio will play before
it turns off automatically, and press the
Select button to select that time. When
the sleep timer is active you can check
the remaining time by means of pressing Sleep on remote. A small clock face [ ] will show
on the display when the Sleep timer is active. To cancel Sleep, press the Sleep button until
the display shows “Off”.
5. SOURCE: Press repeatedly to change sources.
6. INFO: Press repeatedly to cycle through the information available depending on the source
mode you are in. This function will not work in Auxiliary mode.
4
2
3
11
8
10
13
9
7
6
1
5
12
MONO
BAC K
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tivoli MODEL 10 PLUS Stereo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tivoli MODEL 10 PLUS Stereo in the language / languages: English, German, Danish, French, Norwegian as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info