672452

Titan TTK587GDO Manual

9
Zoom out
Zoom in
Previous page
1/58
Next page
Pruner safety instructions
1. Do not overwork yourself. Take regular breaks to ensure concentrated work and full
control over the product. A moment of inattention while operating the product may result
in serious personal injury.
2. Keep all parts of the body away from the saw chain. Do not remove cut material or hold
material to be cut when saw chain is moving. Make sure the product is switched off when
clearing jammed material. A moment of inattention while operating the product may
result in serious personal injury.
3. Hold the product by insulated gripping surfaces only, because the saw chain may
contact hidden wiring. Saw chains contacting a "live" wire may make exposed metal
parts of the product "live" and could give the operator an electric shock.
4. Keep all parts of the body away from the saw chain when the product is operating.
Before you start the product, make sure the saw chain is not contacting anything. A
moment of inattention while operating this product may cause entanglement of your
clothing or body with the saw chain.
5. Always hold the product with your right hand on the rear handle and your left hand on the
front handle. Holding the product with a reversed hand configuration increases the risk
of personal injury and should never be done.
6. Wear safety glasses and hearing protection. Further protective equipment for head,
hands, legs and feet is recommended. Adequate protective clothing will reduce personal
injury by flying debris or accidental contact with the saw chain.
7. Do not operate the product in a tree. Operation of a product while up in a tree may result
in personal injury.
8. Always keep proper footing and operate the product only when standing on fixed, secure
and level surface. Slippery or unstable surfaces such as ladders may cause a loss of
balance or control of the product.
9. When cutting a limb that is under tension be alert for spring back. When the tension in
the wood fibres is released the spring loaded limb may strike the operator and/or throw
the product out of control.
10. Use extreme caution when cutting brush and saplings. The slender material may catch
the saw chain and be whipped toward you or pull you off balance.
11. Carry the product by the front handle with the product switched off and away from your
body. When transporting or storing the product always fit the guide bar cover. Proper
handling of the product will reduce the likelihood of accidental contact with the moving
saw chain.
12. Follow instructions for lubricating, chain tensioning and changing accessories.
Improperly tensioned or lubricated chain may either break or increase the chance for
kickback.
13. Keep handles dry, clean, and free from oil and grease. Greasy, oily handles are slippery
causing loss of control.
14. Cut wood only. Do not use the product for purposes not intended. For example: do not
use the product for cutting plastic, masonry or non-wood building materials. Use of the
product for operations different than intended could result in a hazardous situation.
15. Pay attention to national and local regulations. National and local regulations may
restrict the use of this product.
16. Remove branches in sections.
17. Beware of dangerous operating positions as well as of the risk of being struck by falling
branches or by those that rebound after hitting the ground.
18. Beware of overhead power lines. Do not use the product in any position that causes any
part to come within 10m of overhead electrical lines.
19. Never cut in areas where the cutting attachment is out of sight.
25CC PETROL MULTI TOOL TTK587GDO
09
… 9 …


Need help? Post your question in this forum.

Forumrules
1

Forum

titan-ttk587gdo

Reset search

  • WE BOUGHT A 587GDO and have not got a bolt/nut with the trimmer - do you know if the model has been modified since 2017 or can the nut be purchased ?
    Thanks Submitted on 27-7-2023 at 17:57

    Reply Report abuse

  • This product is not fit for purpose
    Why it’s there a clear instruction to extent the strummer line and head removal Submitted on 17-5-2022 at 15:41

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Titan TTK587GDO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Titan TTK587GDO in the language / languages: English as an attachment in your email.

The manual is 4,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info