672452

Titan TTK587GDO Manual

10
Zoom out
Zoom in
Previous page
1/58
Next page
Causes and operator prevention of kickback
1. Kickback may occur when the nose or tip of the guide bar touches an object, or when the
wood closes in and pinches the saw chain in the cut.
2. Tip contact in some cases may cause a sudden reverse reaction, kicking the guide bar up
and back towards the operator.
3. Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back
towards the operator.
4. Either of these reactions may cause you to lose control of the saw which could result in
serious personal injury. Do not rely exclusively upon the safety devices built into your
saw. As a chain saw user, you should take several steps to keep your cutting jobs free
from accident or injury.
5. Kickback is the result of tool misuse and/or incorrect operating procedures or conditions
and can be avoided by taking proper precautions as given below:
a). Maintain a firm grip, with thumbs and fingers encircling the chain saw handles, with
both hands on the saw and position your body and arm to allow you to resist
kickback forces. Kickback forces can be controlled by the operator, if proper precautions
are taken. Do not let go of the chain saw.
b). Do not overreach and do not cut above shoulder height. This helps prevent unintended
tip contact and enables better control of the chain saw in unexpected situations.
c). Only use replacement bars and chains specified by the manufacturer. Incorrect
replacement bars and chains may cause chain breakage and/or kickback.
d). Follow the manufacturer's sharpening and maintenance instructions for the saw
chain. Decreasing the depth gauge height can lead to increased kickback.
Fuel handling
1. Always disconnect the spark plug connector and let the product cool down, before
refuelling it. Petrol is easily flammable. Never smoke when you are refuelling the product.
Do not refuel the product, if there is an open fire in the vicinity!
2. Always use suitable aids such as funnels and filler necks. Do not spill any fuel on the
product or its exhaust system. There is a risk of ignition. Remove spilled fuel carefully
from all parts of the product. Any residue which may be present must have completely
volatilised, before the product is put into operation!
3. Never use the product in environments where there is a risk of explosion. Exhaust gases
and fuel fumes are noxious. Fuel fumes can ignite.
4. Never breathe in any fuel fumes, when you are refuelling the product. Never fill the tank in
enclosed spaces, such as basements or sheds. There is a risk of poisoning and explosion!
5. Avoid skin contact with petrol.
6. Do not eat or drink, while you are refuelling the product. If you have swallowed petrol or
oil, or if petrol or oil has got into your eyes, then seek the advice of a doctor immediately.
7. Close the tank lid immediately after filling the tank. Make sure that it is properly closed.
8. Never use the product without an air filter.
Vibration and noise reduction
1. To reduce the impact of noise and vibration emission, limit the time of operation, use low-
vibration and low-noise operating modes as well as wear personal protective equipment.
2. Take the following points into account to minimize the vibration and noise exposure risks:
- Only use the product as intended by its design and these instructions.
- Ensure that the product is in good condition and well maintained.
- Use correct application tools for the product and ensure they in good condition.
- Keep tight grip on the handles/grip surface.
- Maintain this product in accordance with these instructions and keep it well lubricated
(where appropriate).
- Plan your work schedule to spread any high vibration tool use across a number of days.
10
25CC PETROL MULTI TOOL TTK587GDO
… 10 …


Need help? Post your question in this forum.

Forumrules
1

Forum

titan-ttk587gdo

Reset search

  • WE BOUGHT A 587GDO and have not got a bolt/nut with the trimmer - do you know if the model has been modified since 2017 or can the nut be purchased ?
    Thanks Submitted on 27-7-2023 at 17:57

    Reply Report abuse

  • This product is not fit for purpose
    Why it’s there a clear instruction to extent the strummer line and head removal Submitted on 17-5-2022 at 15:41

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Titan TTK587GDO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Titan TTK587GDO in the language / languages: English as an attachment in your email.

The manual is 4,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info