672452

Titan TTK587GDO Manual

7
Zoom out
Zoom in
Previous page
1/58
Next page
- Inspect for damage.
- Check and tighten any loose parts
- Have any damaged parts replaced or repaired with parts having equivalent specifications.
13. Stop the engine before
- Cleaning or when clearing a blockage,
- Checking, carrying out maintenance or working on the product,
- Adjusting the working position of the cutting device,
- Leaving the product unattended.
14. Ensure that the product is correctly located in a designated working position before
starting the engine.
15. While operating the product, always ensure that the operating position is safe and secure.
16. Do not operate the product with a damaged or excessively worn cutting cutting blades
chain or edges.
17. Keep the engine and silencer free of debris, leaves and excessive lubricant to reduce fire
hazards.
18. Always ensure that all handles and guards are fitted when using the product. Never
attempt to use an incomplete product or one fitted with an unauthorised modification.
19. Always use two hands to operate a product fitted with two handles.
20. Always be aware of your surroundings and stay alert for possible hazards of which you
may not be aware due to the noise of the product.
21. Always ensure that ventilation openings are kept clear of debris.
Operation
1. This product should not be used for any other purpose than described. Note that national
regulations can restrict the use of this product.
2. Working with this product is demanding; therefore, ensure you are physically and mentally
fit to complete the job safely. Do not use the product when you are tired, ill or under the
influence of alcohol or other drugs.
3. Pay attention to your posture; always use the provided harness and keep your back
straight. Do not overwork yourself. Take regular breaks to ensure concentrated work and
full control over the product.
4. Keep a firm footing and balance during operation. Always be sure of a safe and secure
operating position, whilst using the product. Never use the product standing on steps or a
ladder.
5. Always wear substantial footwear and long trousers while operating. Do not operate the
product when barefoot or wearing open sandals. Wear protective glasses or goggles.
6. Thoroughly inspect the area where the product is to be used and remove all objects which
can be thrown by the product.
7. Before using the product and after any impact, check for signs of wear or damage and
repair as necessary.
8. Never operate the product with damaged guards or without the guards in place.
9. Keep hands and feet away from the cutting means at all times, and especially when
switching on the motor.
10. Never allow children or people unfamiliar with the instructions to use the product.
11. Stop using the product while people, especially children, or pets are nearby.
12. Only use the product in daylight or good artificial light.
07
25CC PETROL MULTI TOOL TTK587GDO
… 7 …


Need help? Post your question in this forum.

Forumrules
1

Forum

titan-ttk587gdo

Reset search

  • WE BOUGHT A 587GDO and have not got a bolt/nut with the trimmer - do you know if the model has been modified since 2017 or can the nut be purchased ?
    Thanks Submitted on 27-7-2023 at 17:57

    Reply Report abuse

  • This product is not fit for purpose
    Why it’s there a clear instruction to extent the strummer line and head removal Submitted on 17-5-2022 at 15:41

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Titan TTK587GDO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Titan TTK587GDO in the language / languages: English as an attachment in your email.

The manual is 4,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info