672452
6
Zoom out
Zoom in
Previous page
1/58
Next page
1. SAFETY INSTRUCTIONS
Warning! Read these instructions carefully before operating this tool. Make
sure that you are familiar with the controls and know how to properly operate
the machine. By following these instructions, you can reduce the risk of fire,
electric shock and personal injury.
GENERAL SAFETY INSTRUCTIONS
1. This product is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the product by a person
responsible for their safety.
2. Children should be supervised to ensure that they do not play with the product.
IMPORTANT
Read carefully before use
Keep for future reference
3. Read the instructions carefully. Become familiar with the instruction manual before
attempting to operate the product.
4. Never allow children or people unfamiliar with these instructions to use the product. Local
regulations can restrict the age of the operator.
5. Never operate the product while people, especially children, or pets are nearby.
6. Keep in mind that the operator or user is responsible for accidents or hazards occurring to
other people or their property.
Preparation
1. This product can cause serious injuries. Read the instructions carefully for the correct
handling, preparation, maintenance, starting and stopping of the product. Become familiar
with all controls and the proper use of the product.
2. Never allow children to use this product.
3. Avoid operating while people, especially children, are nearby.
4. Dress properly! Do not wear loose clothing or jewellery which can be caught in moving
parts. Use of sturdy gloves, non-skid footwear and safety glasses is recommended.
5. Take extra care when handling fuel. They are flammable and the vapours are explosive.
The following points should be observed:
- Only use approved containers to store fuel.
- Never remove the fuel tank cap or add fuel with the power source running. Allow engine
and exhaust components to cool down before refuelling.
- Do not smoke when operating fuelling, or starting this machine.
- Never refuel indoors or in confirmed spaces.
- Never store the product or fuel container inside where there is an open flame, such as
near a boiler.
- If fuel is spilled, do not attempt to start the product, but move it away from the area of
spillage before starting.
- Always replace and securely tighten the fuel tank cap after refuelling.
- Drain fuel outdoors only.
6. If the cutting mechanism strikes any foreign object or the product starts making any
unusual noise or vibration, shut off the power source and allow the product to stop.
Disconnect the spark plug wire from the spark plug and take the following steps:
06
25CC PETROL MULTI TOOL TTK587GDO
6


Need help? Post your question in this forum.

Forumrules
1

Forum

titan-ttk587gdo

Reset search

  • WE BOUGHT A 587GDO and have not got a bolt/nut with the trimmer - do you know if the model has been modified since 2017 or can the nut be purchased ?
    Thanks Submitted on 27-7-2023 at 17:57

    Reply Report abuse
  • This product is not fit for purpose
    Why it’s there a clear instruction to extent the strummer line and head removal Submitted on 17-5-2022 at 15:41

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Titan TTK587GDO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Titan TTK587GDO in the language / languages: English as an attachment in your email.

The manual is 4,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info