806058
8
Zoom out
Zoom in
Previous page
1/9
Next page
4
this threshold, the alert sounds. The highest setting is 240 BPM.
Hr-LO
Enter the upper heart rate threshold. If your heart rate goes below
this threshold, the alert sounds. The lowest setting is 30 BPM.
INZONE Alarm
Select ON to alert you when your heart rate is outside the Low or
High settings, or OFF to disable the heart rate zone alert.
TARGET Step
Enter your desired Target steps from 100 to 9900 steps
5. Press and hold button A to exit the setting mode.
CHRONOGRAPH MODE:
1. Press button C (Mode) until the mode prompt shows "CHRO". The
watch will enter the chronograph display with prompt "CHRONO"
displayed on the upper row. The Time of the Chronograph is
displayed at the lower row.
2. Press button B (Start/Stop/+) to start or stop the Chronograph. Press
button D (Reset/Lap/-) while chronograph is running to take "Lap"
time measurement. Lap" time view will be released in 5 sec
automatically.
3. Press and hold button D (Reset/Lap/-) while chronograph is stopped
to clear the chronograph.
LOOP TIMER MODE:
Press button C (Mode) until the mode prompt shows "TIMR". The watch will
enter the Loop Count Down Timer display with segment (SG-1 .. SG-6)
displayed on the left upper row. The loop counter is displayed at the right
upper row. The Count Down Time is displayed at the lower row.
Press button D (Reset/Lap/-) to select the segment from SG-1 to SG-6.
Press button B (Start/Stop/+) to start or stop the timer operation.
Press and hold button D (Reset/Lap/-) while timer is stopped to clear all
count down time and reload the preset times again.
Timer Setting Mode
1. Press button C (Mode) until the mode prompt shows "TIMR".
2. Press and hold button A (Set/Indiglo) to enter the Loop Timer Setting mode.
3. Press B (Start/Stop/+) or D (Reset/Lap/-) to select SEG 1-6.
4. Press button C (Mode) to set Timer Second. Press B (Start/Stop/+) or D (Reset/Lap/-) to adjust to your
desired “Secondsetting.
5. Press button C (Mode) to set Timer Minute. Press B (Start/Stop/+) or D (Reset/Lap/-) to adjust to your
desired Minutesetting.
6. Press button C (Mode) to set Timer Hour. Press B (Start/Stop/+) or D (Reset/Lap/-) to adjust to your
desired Hoursetting.
7. Press and hold button A (Set/Indiglo) to exit the setting mode.
The timer alert beep sound will be generated when each timer counts down to zero. Next segment of the timer
will be loaded and start to count down automatically. The number of loops is 20. Timer will stop automatically.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Timex 05S096000 Ironman Transit plus M05S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Timex 05S096000 Ironman Transit plus M05S in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info