516096

Thomson VMD20 Manual

65
Zoom out
Zoom in
Previous page
1/104
Next page
EN63
* Connect when an S-Video cable is not used.
** When connecting the cables, open this cover.
VCR (Playback deck)
Connector
cover**
TV
To AV
To S-VIDEO
Cable Adapter
(not provided)
If your VCR has a
SCART connector,
use a commercially
available output
cable adapter.
S-Video cable
(provided)
Core filter
Core filter
Audio/Video cable
[mini-plug to RCA plug]
(provided)
Dubbing Images/Sounds Recorded On A
Tape To Another Tape
[To use this camcorder as a recorder: Only
for VMD20 owners]
1
Make sure all units are turned off, then connect the
camcorder and the VCR as shown in the illustration.
Also refer to pg. 58 and 59.
2
Set “SOUND MODE” to “12 BIT” or “16 BIT” and
“REC MODE” to “SP” or “LP” in the Menu Screen
depending on your preference (੬ pg. 11, 30, 31).
3
Set the camcorder’s Power Switch to “ ” while
pressing down the Lock Button located on the switch.
Turn on the VCR’s power and insert the appropriate
cassettes in the camcorder and the VCR.
4
Set “AV/S-VIDEO” to “ON” in the Menu Screen to
engage the analogue input mode (੬ pg. 46).
5
Press the Recording Start/Stop Button on the
camcorder to engage the Record-Pause mode. “AV.
IN” appears on the screen.
6
Engage the VCR’s Play mode, then engage the Still
Playback mode when you have found a spot just
before the edit-in point.
7
Press the Recording Start/Stop Button on the
camcorder to engage the Record mode. “
AV. IN
”
appears on the screen. Engage the VCR’s Play mode.
8
To stop dubbing, press the Recording Star/Stop Button
on the camcorder so that “AV. IN” reappears, then
engage the VCR’s Stop mode.
9
Repeat steps 6 through 8 for additional editing.
10
Set “AV/S-VIDEO” back to “OFF” in the Menu Screen
to disengage the analogue input mode (੬ pg. 46).
NOTES:
●
Use the provided cables, making sure to connect the
ends with a core filter to the camcorder. The core filter
reduces interference.
●
To use an output cable adapter (commercially
available), refer to its instructions.
●
It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery pack
(
੬
pg. 7).
●
Analogue signals can be converted to digital signals with
this procedure.
●
It is also possible to dub from another camcorder.
To Audio, Video* and
S-Video connectors
Downloaded from www.Manualslib.com manuals search engine
… 65 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson VMD20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson VMD20 in the language / languages: English as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info