658790
15
Zoom out
Zoom in
Previous page
1/29
Next page
English
11
NOTE: Timeshift only works correctly when a fast USB storage device such as
a USB 2.0 HDD is connected to the receiver. Distorted picture and/or
audio during Timeshift indicates a too low USB device speed. In the case
of Timeshift being activated at channels with a high data rate (HD), we
cannot guarantee an accurate playback of the Timeshift le.
WARNING: The broadcasting rights of encrypted channels may be limited by the
provider and fast forward/rewind may not be possible or the Timeshift
function may be limited.
6.10 Playback of recording
If you have made recordings, you can nd these in menu Storage and select Media player. Press OK
to open the media player and make sure the selection is DVR by using the t u buttons. The root of
USB is shown as disk_0 and press OK to open the record list.
Select the recorded event with pq and start the playback in PIG screen mode with OK. Press again
OK to start playback in full screen modes. During this playback you can press to call the playback
screen banner. Here you can select options to step, to rewind or jump forward and to read details of
event and time.
WARNING: For encrypted channels broadcasting rights may be limited by the
provider, which is why some channels are restricted during playback
to fast forward/rewind, or possibly limited in another way. When the
Maturity Rating is activated for a certain programme, you must enter the
corresponding PIN code Maturity Rating master PIN: 0000 to be able to
record this programme.
NOTE: The default maturity rating master PIN can be changed by the operator.
7.0 MAIN MENU
Press MENU in viewing mode to display the menu. All important settings and features of your
receiver can be operated from this menu. It consists of the following sub-menus: Installation,
Channel, Settings, Storage and Tools.
Use t u to select a sub-menu and pq to choose an option. Press OK to advance to the chosen
submenu.
7.1 Installation
This menu allows you to change satellite settings and to search for channels. Furthermore, you can
adjust important settings for your receiver. It consists of the following sub-menus: Installation Guide,
Dish Settings, Motor Settings, Channel Search, Manual Search and FST/FNT Search. Choose a sub
menu with pq and press OK to advance.
7.1.1 Installation Guide
Use this menu to follow the rst installation wizard again as you did the rst time to install the receiver.
It will guide you through the Welcome 1st Step: Language to the last Step6 to search for channels.
7.1.2 Dish Settings
Use this menu to change or add settings for an already installed or a new satellite and to congure its
parameters. Here you can congure which type of DiSEqC you are using, use t u to change. In case
your setup differs from the default setting, you can adjust DiSEqC to any port you would like. If you
use DiSEqC OFF you will only be able to setup one satellite. For usage with DiSEqC 1.0 you can setup
up to4 satellite positions. If you use DiSEqC 1.1 you can setup up to 16 satellites positions.
Satellite Press OK to open the list of available satellites and chose the preferred satellite with
pq or P+/P- and conrm by pressing OK.
LNB Power Change the LNB power with t u if necessary.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS815 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS815 in the language / languages: English as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info