658789
17
Zoom out
Zoom in
Previous page
1/30
Next page
English
13
Satellite: Here you will nd a list of satellites, only select a satellite/s which is available in your
installation or have been congured previously.
If this option is marked, the name and position can be changed using the RED
Rename Satellite button. To do this use pq and t u, on the shown keyboard, to
navigate.
Transponder: Use the t u buttons to switch between the transponders of the selected satellite.
You can also press OK to list them. Use pq or P+/P- to scroll through the list.
Conrm your selection with OK. Press the RED button to Edit TP, the GREEN to Add
TP or YELLOW to Delete Current TP. Details can be found in chapter 7.1.3.1 Edit,
add or delete transponders
Channel type Use t u to select the channels you'd like to search for: All, only Free-to-air or
Encrypted channels.
Scan mode TV & Radio searches for TV and radio channels, TV only for TV channels and radio
only for radio channels.
Search for Use t u to select the search type to be performed. You can choose between the
following options:
One Satellite: Searching on the selected satellite
Selected Satellites:
Search for all installed satellites. * This option displays a menu for selecting the
installed satellites. After selection, please use the RED Search key to continue the
search.
NIT Table: NIT Scan on the selected satellite.
Load HD Austria channel list:
This option allows you to install the HD Austria channel list. In this case, previously
installed channels are kept and are listed correspondingly. TV or Radio channels
which are not included in the HD Austria channel list are sorted at channel numbers
starting with 4000 or 6000 and only such can still be edited.
One Transponder:
Search on the transponder selected in above
After choosing the desired settings, press OK to start the channel search, or press to exit the
menu without scanning.
* Only available if more than one satellite has been setup.
NOTE: Network Data/NIT Table (Network Identication Table): This function
allows you to search the NIT data of the corresponding satellite to receive
newly released channels. Please consider that in contrast to Astra 19.2
and HotBird 13.0 some satellites do not have this database respectively
can only support it partly. If you have any questions, please contact your
dealer or the service.
NOTE: If you want to add or edit parameters for a transponder, we
recommend verifying it by consulting websites like: www.lyngsat.com;
www.kingsofsat.net or you can refer to professional journals.
7.1.4 1 Edit, add or delete transponders
In this submenu, you can edit transponders. Use pq to navigate.
Frequency: Use the 0~9 buttons to enter the desired/changed frequency.
Symbol Rate: Use the 0~9 buttons to enter the required symbol rate.
Polarization: Use the t u buttons to change the polarization.
Select pq Save to accept or Cancel to discard the changes.
If you have selected a specic transponder from the list and want to delete it, use the YELLOW key
and conrm the message with OK.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS814 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS814 in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson THS814

Thomson THS814 User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info