658789
15
Zoom out
Zoom in
Previous page
1/30
Next page
English
11
current time use the GREEN button. The RED button allows you to book a timer for a selected event
and with LIST you can open the timer list.
For details on editing timers, see chapter 7.3.4 Timer, the function is identical.
Use the EPG button to switch to Single EPG.
Single EPG
In this form of the EPG, you always see the list of information for the selected channel on the right
where you can use pq to select an event. The corresponding event description is located in the
lower area. To go to the next or previous day, use the BLUE and YELLOW buttons, to return to the
current contents use the GREEN button. The remaining functions stay as described above. To switch
to the Grid EPG use the EPG button and to leave the menu use or press OK for a 2nd time on the
selected channel.
The detailed description of the timer functions can be found in chapter 7.3.4 Timer.
NOTE: Availability of EPG data depends on broadcast and can be displayed for up
to 7 days. If you are opening the EPG just after the receiver was switched
on or changed to another transponder we recommend to wait for a short
moment in order to collect the data.
7.0 MAIN MENU
Press MENU in viewing mode to display the main menu. All important settings and features of your
receiver can be operated from there. It consists of the following sub-menus: Installation, Channels,
Settings, Multimedia, Update and CA Menu.
Use t u to select a sub-menu and pq to choose an option. Press OK to open the chosen
submenu.
7.1 Installation
Press MENU and select Installation with t u. The following sub-menus are available: Antenna
Setup, Motor Setting, Channel Search and Factory Reset.
7.1.1 Antenna Setup
In this menu, you can change and adapt settings for the antenna(s) and their transponders. Use the
t u buttons to change settings, and use pq to select an item, or press OK to list the settings. For
the default setting of DiSEqC 1.0, you can set the parameters for up to 4 satellite positions Port 1-4.
Satellite Press OK to open the list of available satellites. Select the desired satellite with pq
or P+/P- and conrm with OK.
LNB Power If necessary, you can change the LNB voltage using the t u buttons.
LNB Type Select the desired LNB type using the t u buttons if you are not using a universal
LNB. Available are: C Band, SatCR and User dened.
LNB Freq Displays the corresponding values for the LNB type. 4 adjustments are possible.
22 KHz Tone Not congurable at Universal LNB Type.
DiSEqC 1.0 If DiSEqC 1.0 is used, up to 4 positions can be linked to satellites.
DiSEqC 1.1 If DiSEqC 1.1 is used, up to 16 positions can be linked to satellites.
Transponder Press OK to open the list of available transponders for the selected satellite to check
the parameters or adjust the antenna.
Unicable freq When using SatCR LNB Type, this option appears to enter the desired frequency.
Unicable ub When using SatCR LNB Type, this option appears to enter the desired ID number.
If Transponder is highlighted, the channel search can be started on this TP by using the RED Search
button or just press OK, the GREEN Auto DiSEqC Search* button allows you to search for available
satellites in the existing antenna installation.
* This function can nd available satellites within the already persisting installation. The precongured satellites are: Astra 19.2E, Astra
23.5E, Astra 28.2E, HotBird 13.0E and Eutelsat 9.0E.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS814 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS814 in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson THS814

Thomson THS814 User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info