Manual Thomson THS221 (page 19 of 34) (English)

658774

Zoom out

Zoom in

1/34

MAIN MENU

P15

English

NIT: Network Information Table. If selected On, the receiver will use the NIT

provided by the satellite provider to search for channels. If selected Off, the

receiver will search with its pre-installed transponder list.

Programme: Select Free Only to search for Free to Air channels. Select All to include

scrambled channels as well. Note: Scrambled channels cannot be watched

with this receiver.

Scan Mode: Default TP: All stored transponders in the memory will be scanned.

Blind: Slow scan in 2 MHz steps. The receiver will first scan the whole

frequency band to find the transponders it can lock on. After gathering

all transponders, it scans the transponders one by one to get all available

programmes.

One TP: The transponder selected under Transponder will only be scanned.

Scan Select: Select All Sat to search all satellites you have selected in the Satellite Setting

menu. Select Single Sat to search only the satellite selected under Satellite.

After conguring, press GREEN to start scanning with the selected settings.

Your receiver will now perform an automatic channel search with the scanning progress shown

on screen. During the channel search you can quit the scan process with EXIT or MENU. When the

progress has been completed, all found channels will be stored and the receiver will switch to the

rst found channel.

7.1.5 Manual scan - Scanning by transponder

Select the options if you want to do a manual scan. (Advanced users.)

Satellite: Select the satellite you wish to scan from, as previously set up in the

Satellite Setting menu.

Frequency: Enter a known frequency of a satellite transponder with the 0~9 buttons

on the remote.

Symbol Rate: Enter the symbol rate of the previously set satellite transponder with the

0~9 buttons on the remote.

Polarity: Set the polarization of the previously set satellite transponder, V (Vertical)

or H (Horizontal).

NIT: Select On if you want to do a scan starting from the previously set satellite

transponder according to the Network Information Table, as offered by the

Satellite Provider. Select Off, to scan just the one transponder.

Programme: Select Free Only to search for Free to Air channels. Select All to include

scrambled channels as well. Note: Scrambled channels cannot be watched

with this receiver.

After conguring, press GREEN to start scanning with the selected settings.

Your receiver will now perform a channel search with the scanning progress shown on screen.

During the channel search you can quit the scan process by pressing EXIT or MENU. When the

progress has been completed, all found channels will be stored and the receiver will switch to

channel number 1. The new found channels are added to the end of the list.

Satellite Finder: You can use the menus Satellite Setting, Automatic Sat Scan or Manual

Scan to find a satellite and peak the dish for maximum reception. Select

the satellite you wish to find or peak, select the settings according to your

dish-setup and then select a transponder which is known to carry a signal.

What is the 3 digit Code to use in a Universal Remote Control for a Thomson THS221 Satellite Receiver? Submitted on 18-9-2022 at 11:22
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS221 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson THS221

Thomson THS221 User Manual - German - 40 pages

Thomson THS221 User Manual - French - 34 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Thomson THS221 Manual

Product: