Manual Thomson THS221 (page 18 of 34) (English)

658774

Zoom out

Zoom in

1/34

P14

MAIN MENU

Use tu to switch between Left and Right window. (Satellite List and Transponder List.)

Add: While in the satellite name list: Press YELLOW to add a new satellite. In

the popup window, enter a satellite name with the key table (press u),

selecting a character by using the navigation buttons. Press OK to enter

the chosen character. When you have entered the name, navigate to the

 on screen and press OK on the remote control to confirm the new

name. Select the satellites position E for East and W for West. Longitude:

Use the numeric keys to enter the longitude of the satellite. Save the

settings with OK or cancel with EXIT.

While in the Transponder list: Press YELLOW to add a new Transponder. In

the popup window enter the frequency, symbol rate and polarity of the

new transponder.

Delete While in the satellite name list: Press BLUE to delete a satellite from the list.

Press GREEN to delete the selected satellite, select YELLOW to delete all

satellites. Confirm deleting with OK or EXIT to cancel.

While in the Transponder list: Press BLUE to delete a transponder from the

list. Press GREEN to delete the selected transponder, select YELLOW to

delete all transponders. Confirm deleting with OK or EXIT to cancel.

Edit: While in the satellite name list: Press RED Edit to enter the Sat Edit window.

Select the satellites position E for East and W for West. Longitude: Use the

numeric keys to enter the longitude of the satellite. Enter a satellite name

with the key table (press u), selecting a character by using the navigation

buttons. Press OK to enter the chosen character. When you have entered

the name, navigate to the  on screen and press OK on the remote

control to confirm the new name. Save the settings with OK or cancel by

EXIT.

While in the Transponder list: Press RED Edit to enter the TP Edit window.

Frequency: Use the numeric keys to enter a known frequency of the

satellite transponder. Symbol Rate: Use the 0~9 buttons to enter the

symbol rate of the satellite transponder.

Polarity: Press tu to select the polarization of the satellite transponder. V

(Vertical) or H (Horizontal).

After entering all data, press OK and conrm with OK or press EXIT to leave without saving.

Use GREEN to enter to the Automatic scan window.

NOTE: Deleted satellites and transponders from the pre-installed lists can only be

retrieved by performing a factory reset.

7.1.4 Automatic SAT scan

Select the options if you want to do automatic scan.

Satellite: Select the satellite you wish to scan, as previously set up in the Satellite

Setting menu.

Transponder: Select a transponder which is known to carry a signal to check if reception

of the satellite is possible.

What is the 3 digit Code to use in a Universal Remote Control for a Thomson THS221 Satellite Receiver? Submitted on 18-9-2022 at 11:22
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS221 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson THS221

Thomson THS221 User Manual - German - 40 pages

Thomson THS221 User Manual - French - 34 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Thomson THS221 Manual

Product: