658774
17
Zoom out
Zoom in
Previous page
1/34
Next page
MAIN MENU
P13
English
7.1.2 Configure the antenna settings for the selected satellite
Satellite The name of the selected satellite is shown here.
LNB The setting is Universal LNB (09750/10600) – the most used on the market.
Transponder Select a transponder, known to carry a signal.
DiSEqC 1.0 Select the switch type in use. 4to1(DiSEqC 1.0) or 16to1. (DiSEqC 1.1)
Select Tone Burst if a Legacy 2to1 switch is used.
Uncommitted If uncommitted DiSEqC switches are used, select them here. (Advanced
user setup)
22K Tone Auto: this setting will follow automatically.
Polarity 13/18 V, this setting will follow automatically.
Motor If using a motor, press tu to choose DiSEqC1.2/GOTOX. Then press OK to
show the menu for setting the position for your location.
DiSEqC1.2 Move the motor to the right position for locking the signal like explained
below.
Move Continue: press tu for moving West/East. It will keep moving as
long as the button is kept pressed. By pressing once it will move in 1° step.
Move Step(1): press tu for moving West/East in 0.3° step.
Store Position: to store the current motor position for selected satellite.
Goto Reference: to go to the reference 0° position.
GOTO X Select GOTO X with the tu buttons. Press GREEN to setup your location
coordinates. A pop-up window will appear, in which the following settings
can be made:
Location: Press tu to select one of the pre-set locations. Choose a location nearest
to you. If you know the coordinates of your place of residence, you can
choose Manual and make the following extra adjustments:
Longitude Direction: Choose East or West.
Longitude Angle: Press the 0~9 buttons to enter the coordinate.
Latitude Direction: Choose North or South.
Latitude Angle: Press the 0~9 buttons to enter the coordinate. When all settings have
been made, press EXIT to save the data and leave the window. Now
press OK to enter the GOTO X menu. Move Auto will move the dish to the
selected satellite automatically. For Move Continue, Move Step (1) and Goto
Reference please see explanation above.
SatCR Select On, if you use a SatCR LNB, otherwise leave to Off. When On is
selected press YELLOW (Setup SatCR) to enter the Sat setup page.
Position: Select the LNB A or LNB B.
IF Channel: Select the IF channel number according to the specifications of your
SatCR LNB. Note: Any SatCR LNB in the chain needs a different IF channel
number.
Center Frequency: Select the Center Frequency according to the specifications of your SatCR
LNB. Note: Any SatCR LNB in the chain needs a different Center Frequency.
Select the store button to nalize your settings or press MENU or EXIT to leave without storing.
7.1.3 Satellite and Transponder edit options
When in Satellite Setting use the RED TP Edit button to edit Satellites and Transponders.
17


Need help? Post your question in this forum.

Forumrules
1

Forum

thomson-ths221

Reset search

  • What is the 3 digit Code to use in a Universal Remote Control for a Thomson THS221 Satellite Receiver? Submitted on 18-9-2022 at 11:22

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS221 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS221 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson THS221

Thomson THS221 User Manual - German - 40 pages

Thomson THS221 User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info