Manual Thermocet VERSA LV-HV (page 4 of 14) (English)

607247

Zoom out

Zoom in

1/14

Page.4

Warning

If the pilot light goes out, you must wait at least 5 minutes before lighting the appliance again.

2.2 Operation of thermostat

The modulating thermostat ensures that the temperature selected with the thermostat knob (A) is precisely

maintained. If you set the thermostat knob (A), the burner will start burning at full power first of all, but will

then start to burn lower and find a stable setting. If the room temperature falls, the burner will start burning

higher until the correct temperature has been regained. This is regulated automatically by the thermostat.

2.3 Operation of glow-effect burner

The glow-effect burner will only start to burn if you open the slide (B) and only works if the thermostat knob

is set between positions 1 and 7. The required flame height has a continuously variable adjustment.

2.4 Operation of fan (only applies to HV model)

This fire is fitted with a fan system for fast heat emission. The fan comes into operation automatically if a

temperature of 60°C is reached in the fireplace. The fire is also fitted with a two-way switch (see page 10 fig-

ure 4-D) with which to regulate the rotational speed of the fan. Setting 1 = low speed and setting 2 = high

speed. If you switch the fire off, the fan will turn itself off in due course. Never use the fire if it is not possi-

ble for the fan to operate (the plug must always be in the socket therefore!).

2.5 Switching off the fire

* To turn the stove off completely, turn the thermostat knob to position ?. The pilot light will then go

out. We recommend, however, that you allow the appliance to continue burning on the pilot light dur-

ing periods when the appliance is being used.

* If the stove is out of use for a longer period, then it is also wise to shut off the gas stopcock in the sup

ply pipe.

2.6 Maintenance

* The stove can be cleaned with a soft damp cloth. The appliance should be turned off immediately if

some thing is spilled on it and the marks can be removed with soft soap suds once the stove has cooled

down. Never use an abrasive!!!

* Any deposit on the glass can be removed with glass cleaner.

* It is advisable to have the stove and the chimney checked and cleaned by an installer before every heat-

ing season. If the special glass is broken or cracked, have it replaced at once, before you turn the stove

on again.

Warning

Gas stoves become hot when they are in use. Care must be taken therefore and children and invalids, for ex-

ample, should be kept away from burning stoves. Stoves must also never be installed on or against combusti-

ble materials (curtains etc.).

3. OUTLET SAFETY (T.T.B) (See page 9 figs. 2-4)

Purpose:

The appliance is fitted with a thermal outlet safety or T.T.B. (thermal draught protection), which switches off

the pilot light and the burner as well, therefore, if there is a leak of combustion gases out of the draught lim-

iter. The outlet safety must never be rendered inoperative.

Operation:

The detection device is a thermostat that opens an electrical contact when a certain temperature is exceeded,

thereby interrupting the thermocouple current. This causes the control block to switch off the gas supply to

the main burner and pilot light burner. The appliance can be ignited again after waiting 5 minutes for the de-

tection device to cool down.

Hi my versa lv fire would not stay lit, we have cleaned it and now it lights but only stays lit for about 30 seconds and goes out again. Does anyone have any advice? Submitted on 19-3-2022 at 12:34
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Thermocet VERSA LV-HV in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Thermocet VERSA LV-HV Manual

Product: