Manual Thane TOTAL FLEX Ab Developer (page 11 of 15) (English)

573471

Zoom out

Zoom in

1/15

ab DeVELOPER

USER GUIDE

FIG. 15 FIG. 16

REPLACING RESISTANCE BANDS

Lay a Pulley over the first Resistance Band and insert the Pulley Axle through the first Pulley before laying

the next Pulley over the second Resistance Band and inserting the Pulley Axle through the second

Pulley. Repeat for the third Pulley. Push the Pulley Axle all the way through and screw on the Acorn Nut

[see Fig. 15].

Important: Once the Acorn Nuts have been tightened by hand, securely tighten the two Nuts at

either end of the Pulley Axle by using two no. 13 wrenches (not provided) (see Fig. 16).

Hook Resistance Bands to Rail Hooks at the top of the Rail [see Fig. 17].

Turn the Rail Assembly over with the Foam Rollers facing up and insert the Rail Cover and screw into

place [Fig. 18 & 19].

FIG. 17

FIG. 18 FIG. 19

REPLACING RESISTANCE BANDS

Connect the Seat Connector to the Rail Assembly by aligning the 4 holes in the Rail Assembly with the 4

holes in the Hinge Bracket. Insert the 4 Button Head Screws and tighten securely with the supplied Allen

Wrench [see Fig. 20].

This completes the replacement of the Resistance Band (s).

FIG. 20

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Thane TOTAL FLEX Ab Developer in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Thane TOTAL FLEX Ab Developer Manual

Product: