TIME BLOCK – Radio-controlled alarm clock
TIME BLOCK – Radio-controlled alarm clock
1110
•
Do not use the unit if the housing or the main adapter is damaged.
•
Keep the unit out of reach of persons (including children) who cannot fully appreciate
the potential risks of handling electrical equipment.
•
Pull the plug out of the socket immediately if any fault occurs or if the unit is not used for
a lengthy period.
•
Only use the supplied mains adapter.
•
Do not pull the plug out of the socket by its lead.
•
Route the mains lead so that it does not come into contact with sharp-edged or hot
objects.
Caution!
Risk of injury:
•
Keep the battery out of reach of children.
•
Batteries must not be thrown into the fire, short-circuited, taken apart or recharged. Risk
of explosion!
•
Batteries can be fatal if swallowed. If a battery has been swallowed, get medical assis-
tance immediately.
•
Batteries contain harmful acids. Low batteries should be changed as soon as possible to
prevent damage caused by a leaking battery.
•
Wear chemical-resistant protective gloves and glasses when handling leaked batteries.
Important information on product safety!
•
Do not place the unit near extreme temperatures, vibration or shockshock.
•
Do not place any objects on the instrument.
5. Elements and buttons
1.
PM indicator 2. DCF symbol
3. IR motion sensor 4. Alarm indicator
5. SNOOZE button 6. ALARM ON/OFF switch
7. FUNCTION switch 8. RESET hole
9. DC jack 10. Button cell compartment
11. Brightness adjusting switch 12. MODE button
13. UP button 14. DOWN button
15. CR2032 button cell 16. Button cell compartment cover
17. Temperature sensor
6. Getting started
•
Open the battery compartment and remove the insulation strip.
•
Insert the adapter into the jack. Connect the power adapter to a wall socket. Important!
Make sure that your household voltage is 230V! Otherwise your clock may be damaged.
•
A short beep sounds.
Thank you for choosing this instrument from TFA.
1. Before you use it
•
Please be sure to read the instruction manual carefully. This information will help you to
familiarise yourself with your new device, learn all of its functions and parts, find out
important details about its first use and how to operate it, and get advice in the event of
faults.
•
Following the instruction manual for use will prevent damage to the device and loss of
your statutory rights arising from defects due to incorrect use.
•
We shall not be liable for any damage occurring as a result of not following these
instructions.
•
Likewise, we take no responsibility for any incorrect readings and for any consequences
which may result from them.
•
Please take particular note of the safety advice!
•
Please keep this instruction manual for future reference.
2. Scope of supply
•
Radio-controlled alarm clock
•
AC/DC power adaptor
•
Battery CR2032
•
Instruction manual
3. Field of operation and all of the benefits of your new instrument at a glance
• Large LED digits
• Highest precision radio-controlled clock
• Temperature display
(°C/°F)
• Alarm with snooze function
•
Date
• IR motion sensor
• Three brightness levels
4. For your safety
•
The product is exclusively intended for the field of application described above. The pro-
duct should only be used as described within these instructions.
•
Unauthorised repairs, modifications or changes to the product are prohibited.
•
The product is not be used for medical purpose or for public information, but is intended
only for home use.
Caution!
Risk of electrocution!
•
Plug the instrument only into a socket installed in regulation manner and with a mains
voltage of 230V!
•
The instrument and the mains adapter must not come into contact with water or moisture.
Only suitable for operation in dry interiors.
TFA_No. 60.2508 Anl_08_15 11.08.2015 14:19 Uhr Seite 6
