466152

TFA 35.1083 - Gaia Funk Manual

10
Zoom out
Zoom in
Previous page
1/32
Next page
1918
GAIA – Wireless weather station
╞
GAIA – Wireless weather station
╞
• The change of weather forecast icon is in accord to the relation-
ship between current relative pressure and the pressure change
since the last twelve hours. If the weather is changing, weather
tendency indicator (animated arrows) will be flashing. And after
the next three hours if weather conditions have become stable,
the arrows will fix indicating a stable condition happened.
Notes to pressure sensitivity setting for weather forecasting:
• The pressure threshold can be set to suit the user’s requirement
for weather forecasting from 2-4 hPa (default 3 hPa). Areas that
experience frequent changes in air pressure require a higher
setting compared to an area where the air pressure is stagnant.
For example if 4 hPa is selected, then there must be a fall or rise
in air pressure of at least 4 hPa before the weather station will
register this as a change in weather.
4.4.2 Storm warning indicator
The storm threshold can be set to suit the user’s
requirement for storm forecasting from 5-9 hPa
(default 6 hPa).
When there is a fall over pressure threshold
within 3 hours, the storm forecasting will be acti-
vated, the clouds with rain icon and tendency arrows will flash for
3 hours indicating the storm warning feature has been activated.
4.5 Alarm function
• The weather station can be programmed in that way that in cer-
tain weather conditions an alarm is activated. For this purpose an
upper (High Alarm) and lower limit (Low Alarm) can be set for
many parameters.
• While in Normal Mode press the “ALM” button to enter the High
Alarm Mode.
• Press the “SET” button to select the following alarm modes. Press
“+” button or “MIN/MAX” button to set the high alarm value.
Press and hold the buttons to change the number in great step.
• Press the “ALM” button to choose the alarm on or off. “HI AL”
and an alarm symbol appears or disappears next to the correspon-
ding parameter in the display.
1. Time alarm (hours/minutes, at low alarm setting mode, the
same time alarm setting sequence will repeat)
2. Indoor humidity high alarm
3. Indoor temperature high alarm
4. Outdoor humidity high alarm
5. Outdoor temperature high alarm
6. Dew point
7. Pressure high alarm
• While in Normal Mode press twice the “ALM” button to enter the
Low Alarm Mode.
• Press the “SET” button to select the following alarm modes. Press
“+” button or “MIN/MAX” button to set the low alarm value.
Press and hold the buttons to change the number in great step.
• Press the “ALM” button to choose the alarm on or off. “LO AL” and
an alarm symbol appears or disappears next to the corresponding
parameter in the display.
1. Time alarm (hours/minutes, at high alarm setting mode, the
same time alarm setting sequence will repeat)
2. Indoor humidity low alarm
3. Indoor temperature low alarm
4. Outdoor humidity low alarm
5. Outdoor temperature low alarm
6. Dew point
7. Pressure low alarm
• Remark: After the initial pressing of “ALM” button, “- - -“ will be
displayed for all segments. Later the high and low alarm values
appear if they are activated.
4.5.1 Alarm signal
• When a set weather alarm condition has been triggered, that par-
ticular alarm will sound for 120 seconds. The corresponding value,
“HI AL” or “LO AL” and the alarm symbol are flashing until the
weather condition does not meet the user set level. Press any key
to mute the alarm.
• Example:
Dew point high alarm was triggered:
4.5.2 Alarm clock function
• In the Alarm-Mode HI or LO you can adjust the alarm time. Press
“SET” button.
• The hours are flashing. Press “+” or “MIN/MAX” button to adjust
the hours. Press “SET” button again for to set the minutes.
• Press “ALM” button to switch the alarm off (the alarm symbol
disappears) or on. Confirm with the “SET” button.
• When alarm is sounding, press any button to stop the alarm.
• Once the alarm starts to ring, you can activate the snooze func-
tion by pressing the top button “SNOOZE/LIGHT”. The alarm will
be interrupted for 10 minutes.
4.6 Backlight
• Press the top button “SNOOZE/LIGHT”. The backlight will light for
10 seconds.
digit flashing
digit flashing
digit flashing
TFA_No_35.1083_Anleitung 08.09.2008 12:14 Uhr Seite 10 (Schwarz/Process Black Auszug)
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TFA 35.1083 - Gaia Funk at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TFA 35.1083 - Gaia Funk in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info