Manual Texas MULTI CUT 900TG (page 17 of 40) (English, German, Danish, French)

636752

Zoom out

Zoom in

1/40

Operating on slopes and bank

Stay caution when operating the machine on uneven terrain or slopes, banks.

1. Do not use the on slopes greater than 20 degrees. Doing so could result in serious injury or

damage to you.

2. Always cut across a slope or bank never up and down.

3. Shift into a lower gear before going down a slope or bank. This is to avoid “free-wheeling”

and loss of control over the machine.

If the cutter deck is stuck or blade is clogged

1. Disengage the blade and pull the spark plug.

2. Remove any grass or other things that is clogging the blades.

3. If the cutter deck stuck try to reverse away from the obstacle plus lifting the deck by tipping

the machine forth and back.

Maintenance

Importance of maintenance Good maintenance is cost-saving and essential for safe and trouble-

free operation. To ensure a proper upkeep of your machine, the following pages include a

maintenance schedule and description plus an inspection procedure of your machine. For tasks

that are more difficult, or require special tools, maintenance should be carried out by technician or

qualified mechanic.

Maintenance safety. As with any type of power equipment, carelessness or error on the part of

the operator can result in serious injury. It is impossible to warn against all hazards or hazardous

situations, it is therefore important that the user of the machine exhibits vigilance to operate the

machine safely and rationally to avoid bringing yourself and others in danger.

Safety precautions important: Before commencing any maintenance or repair. Make sure that the

engine is shutdown in order to reduce the possibility of fire or explosion, be careful when working

around gasoline. Use only a non-flammable solvent, not gasoline, to clean parts. Keep cigarettes,

sparks and flames and other sources of ignition away from the machine.

Procedure

Before

Each use

Every 25

Hours

Every 100

Hours

Check Operator Presence Switch

Check Engine Oil Level

Check General Equipment Condition

Check Blade for Sharpness

Lubricate Grease Fittings

Lubricate Clutch

Lubricate Chain

Check Tire Pressure

Change Engine Oil and Filter

Check Tire Pressure

Change Engine OIL and Filter

1st time 5 hours

Clean Engine Exterior and Cooling Fins

Check All Belt Tensions and Condition

Check cable connections

Replace Air Filter and Precleaner**

Replace Spark Plug(s)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Texas MULTI CUT 900TG in the language / languages: English, German, Danish, French as an attachment in your email.

The manual is 1,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Texas MULTI CUT 900TG Manual

Product: