Manual Texas MULTI CUT 900TG (page 19 of 40) (English, German, Danish, French)

636752

Zoom out

Zoom in

1/40

Please dispose the used engine oil environmentally correct. We suggest that you keep the used oil

in a sealed container and dispose at your recycling center or service station for reclamation. Do not

throw it in the waste; pour it on the ground; or down a drain.

The engine has an oil capacity of 1.1 Liter

Spark Plug

Check the spark plug for dirt and grime; if necessary clean it with a copper wire brush.

 first time after approximately 10 hours of operation

 Thereafter service the spark plug after every 50 hours of operation.

How to:

 Disconnect the cap, and remove any dirt from around the spark plug area.

 Remove the spark plug with a spark plug wrench. Inspect the spark plug.

 Replace it if the electrodes are worn, or if the insulator is cracked or chipped.

 Measure the spark plug electrode gap with a suitable gauge.

 The gap should be 0.70 - 0.80 mm. Correct the gap, if necessary, by carefully bending the

electrodes

Sparkplug F7RTC or equivalent; Texas 40-11294

 Mount the spark plug carefully, by hand, to avoid cross-threading.

 After the spark plug seats, tighten with a spark plug wrench to compress the water. If

reattaching a used spark plug, tighten 1/8 - 1/4 turn after the spark plug seats. If installing a

new spark plug, tighten 1/2 turn after the spark plug seats. Attach the spark plug cap.

NOTICE: An incorrect spark plug can cause engine damage.

Idle speed adjustment

How to:

 Start the engine

 Move the lever to the lower throttle position (turtle).

 Turn the throttle adjusting screw to obtain the standard idle speed.

Standard idle speed: 1440 rpm ± 150 rpm

Technical data

MULTI CUT 900TG

Cutting width

660 mm

Cutting high

100 mm

Gear

4 forward, 1 reverse

Blade rotation

1950 rpm

Net weight (kg)

140 Kg

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Texas MULTI CUT 900TG in the language / languages: English, German, Danish, French as an attachment in your email.

The manual is 1,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Texas MULTI CUT 900TG Manual

Product: