514296

Texas Instruments eZ430-Chronos Manual

27
Zoom out
Zoom in
Previous page
1/113
Next page
www.ti.com
eZ430-Chronos Sports Watch Software
3.2.2.5 PowerPoint Mode - RF
This mode requires the eZ430-Chronos Control Center PC software.
Press "#" until "PPt" is shown (see Figure 3-1). This mode allows control of a PowerPoint presentation by
translating button pushes on the watch into keystrokes of the PC keyboard. No acceleration or other data
is transmitted. The default settings are:
• "#" - Go to presentation mode (F5)
• "*" - Previous slide (Left)
• "UP" - Next slide (Right)
The Control Center allows user defined key settings (including combinations) - see Section 3.3.2.
Secondary function: Start/stop transmission of button pushes. Pushing "DOWN" starts/stops the pairing
process or stops the transmission (the access point on the PC must be started from the eZ430-Chronos
Control Center (see Section 3.3.1). The RF icon on the LCD flashes when the radio is active; if pairing
fails, the icon disappears. The top LCD line shows the time during the pairing until the data transmission is
disabled.
Set function: None
3.2.2.6 Sync Mode - RF
This mode requires the eZ430-Chronos Control Center PC software.
Press "#" until "SYnC" is shown (see Figure 3-1). This mode allows doing a variety of watch settings
conveniently from the eZ430-Chronos Control Center PC software over the air (see Section 3.3.3).
• Time settings
• Date settings
• Altitude calibration
• Temperature calibration
Secondary function: Start/stop link for Sync Mode. Pushing "DOWN" starts/stops the pairing process or
stop the link (the access point on the PC must be started first from the eZ430-Chronos Control Center
(see Section 3.3.3). The RF icon on the LCD flashes when the radio is active. If the pairing fails, it
disappears. After a successfully received message, the LCD shows "DONE". The top LCD line is off
during the pairing and until the Sync Mode is disabled.
Set function: None
27
SLAU292D–November 2009–Revised March 2011 eZ430-Chronos Software
Submit Documentation Feedback
© 2009–2011, Texas Instruments Incorporated
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Texas Instruments eZ430-Chronos at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Texas Instruments eZ430-Chronos in the language / languages: English as an attachment in your email.

The manual is 7,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info