514296

Texas Instruments eZ430-Chronos Manual

28
Zoom out
Zoom in
Previous page
1/113
Next page
eZ430-Chronos Sports Watch Software
www.ti.com
3.2.2.7 Calorie/Distance Mode - RF
(4)
Press "#" until the "kcal" icon appears (see Figure 3-1). This mode shows the amount of calories that were
burned while exercising, if the optional chest belt is used and heart rate mode is active. This mode also
provides the distance (for example, when running) if a chest belt with build-in accelerometer is used. For
accurate calorie determination, users need to set their sex and weight.
Secondary function: Distance. Press "DOWN" to activate the alternative display. To return to Calorie
Mode, push the "DOWN" button again.
Set function: (Re-)setting calories and setting user weight and sex.
1. Push the "#" button until the calories is displayed in the bottom LCD line
2. Hold "#" for three seconds until the calorie value flashes on the bottom LCD line
3. (Re-)set the calories by pushing "UP" or "DOWN"
4. Press "#" to continue with the user sex adjustment
5. Set the user sex by pushing "UP" or "DOWN"
6. Press "#" to continue with user weight adjustment
7. Set the user weight (lb in 12H time mode, kg in 24H time mode) by pushing "UP" or "DOWN"
8. Press "*" to confirm the settings and go back to normal operation, or press "#" to start over with step 3
NOTE: If no key is pressed for more than 30 seconds, the previous settings are restored.
3.2.2.8 Wireless Update - RF
This mode requires the eZ430-Chronos Control Center PC software.
Press "#" until the "rFbSL" is shown (see Figure 3-1). This mode allows updating the firmware of the
eZ430-Chronos watch wirelessly.
Secondary function: Start or restart the update process. Push "DOWN" once to switch to the
confirmation menu "CONF". Pushing "DOWN" again starts or restarts the update process (the wireless
update on the PC must be started from the eZ430-Chronos Control Center first (see Section 3.3.1)). At the
beginning of the update the LCD shows "rAM" for a few seconds. During this time, the updater software is
downloaded from the PC to the RAM of the CC430 on the watch. This program contains all memory write
and LCD routines. After this transfer is finished, the code is executed from RAM, and the download of the
actual firmware file is started. The LCD shows the progress in percent on the upper LCD line. After the
transfer is complete, a reset starts the software on the watch. See Section 3.6.4 for details.
NOTE: When the wireless update is activated on the watch, it returns to the main application only
with a reset, whether or not an update was performed. Time, data, alarm, and other
RAM-based data are lost.
(4)
Additional accessory or eZ430-Chronos Control Center heart rate simulation required.
28
eZ430-Chronos Software SLAU292D–November 2009–Revised March 2011
Submit Documentation Feedback
© 2009–2011, Texas Instruments Incorporated
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Texas Instruments eZ430-Chronos at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Texas Instruments eZ430-Chronos in the language / languages: English as an attachment in your email.

The manual is 7,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info