636719
16
Zoom out
Zoom in
Previous page
1/18
Next page
16
Filling of gasoline - Smoking prohibited!
1. Remove the gasoline cap slowly. Place it on a clean surface.
2. Carefully pour the oil mixed fuel into the tank. Beware of spilling.
3. Remount the gasoline cap properly.
4. Wipe any spilled fuel.
Notice! Always turn off the engine when refueling. Never add fuel on a running machine. Always let the
engine cool for 2 minutes before refueling. Move more than 3 meters away from the place where you putted
fuel on the engine before it is started.
Safety warnings
! Mix and store the fuel in approved containers. Mix the fuel outdoors where there are no sparks or
flames.
! Choose a suitable place, turn off the engine and leave it to cool for 2 minutes before refueling.
! Remove the gasoline cap slowly in order to ease gasoline fumes pressure from the fuel tank.
! Wipe any spilled fuel. Move more than 3 meters away from the fueling site before starting the
engine.
Air filter
For correct performance and durability the air filter must be kept clean.
1. Remove the lid of the air filter by unscrewing the screw that fastens the lid.
2. Wash the air filter in a lukewarm soap mixture. Leave it to dry. Pour on a little two-stroke oil Press
out any surplus oil. Replace an old and worn filter.
3. Filter and lid is fitted again. Make sure that the filter and lid is securely tightened.
Clean the air filter for every 5 hours or more often if you work in dusty areas.
Spark plug
This machine is equipped with a spark with an electrode distance of 0,6 mm. For optimal performance it
should be replaced once a year.
Storage
1. Empty all fuel from tank.
2. Clean the head, and store the machine frost free and out of reach for children.
3. Observe all safety precautions concerning safe storage and handling of gasoline.
Lubrication of hedge trimmer accessory
The gearbox is lubricated from the factory, but for every 30-hour operation Grease MUST be refilled. Top up
with grease type: MULTIFAK EP-0 using a grease gun (not included) on the lubrication nipple.
Please note that the gearbox must be lubricated at all-time (all parts)
The blades must be kept lubricated to prevent friction and to extend the durability. Lubricate the blades with
Texas hedge trimmer oil part number 90306507 or other manufacturer of hedge trimmer oil.
Lubricating the chain on the pruner accessory
Let the pruner idle for 2-3 min.
Place saw on a flat surface
Remove the lid.
Add chain oil in the pruner container (top up).
Depending on the conditions you should add chain oil for every 30-45 minutes of use, so check oil
level often. If the pruner is used without chain oil, the chain will be damaged.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Texas BCU33M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Texas BCU33M in the language / languages: English, Danish as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info