636719
13
Zoom out
Zoom in
Previous page
1/18
Next page
13
! Only use original spare parts. If not you may experience bad performance or injury and the warranty
is invalid.
! Examine the tool for loose bolts and nuts, leakage etc. Replace any damaged parts. Replace the
trimmer head / blade if it is cracked, chipped or damaged in any other way.
! Make sure that the trimmer head / blade is fitted correctly and securely fastened. If not this may lead
to serious personal injury.
! Make sure that all safety guards and handles are correctly and securely fastened.
! The cord head rotates while the carburetor is adjusted. Wear protection and follow all safety
instructions.
! Let the engine cool off before storage.
! Empty the fuel tank and fasten the brush cutter when it is transported on a flatbed.
Identification of parts
See fig.1 illustration:
Assembly
Mount the handle as shown in Fig 2A. Ensure that the machine is in balance and bolts are tighten.
Attach the middle tube to the machine, fasten with butterfly knob. See fig 2B.
Attaching the:
Pruner
C. Attach the pruner to the middle tube and fasten. See Fig. 2B.
It is recommended to lubricate the chain every 30-45 min
Hedge trimmer
D. Attach the hedge trimmer to the middle tube and fasten. See Fig. 2B.
Brush cutter and Grass trimmer
E/F. Attach the Brush cutter and Grass trimmer to the machine and fasten.
See fig 2B.
Use of blades
Pruner
Do not use the saw (pruner) standing on a ladder or another aid in unstable position.
Beware of falling branches.
Hedge trimmer
Hedge scissors may be used not only on hedges but also to cut shrubs.
The best cutting output may be obtained when the scissors are conducted at an approximate angle of
15°to the hedge.
To obtain an even height of the hedgerow, it is recommended to have a conducting cord stretched
along the hedge.
Side surface area of the hedge will be trimmed by arched movements from down and upwards.
Clean the unit after every use and check all the integrated tools and protection devices for damages.
A Engine C Pruner E Brush cutter
B D
Hedgtrimmer
( Adjustable 135°)
F Grass trimmer
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Texas BCU33M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Texas BCU33M in the language / languages: English, Danish as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info