636721

Texas BCU26S Manual

12
Zoom out
Zoom in
Previous page
1/45
Next page
12
! Examine the tool for loose bolts and nuts, leakage etc. Replace any damaged parts. Replace the
trimmer head / blade if it is cracked, chipped or damaged in any other way.
! Make sure that the trimmer head / blade is fitted correctly and securely fastened. If not this may lead
to serious personal injury.
! Make sure that all safety guards and handles are correctly and securely fastened.
! The cord head rotates while the carburetor is adjusted. Wear protection and follow all safety
instructions.
! Let the engine cool off before storage.
! Empty the fuel tank and fasten the brush cutter when it is transported.
Identification of parts
See fig.1 illustration:
*Only BCU26S and BCU33S models
Assembly
BCU 26 and BCU 33
Follow the mounting procedure as shown in Fig.2-A, Fig 2-B and Fig 3
1. Mount the protection guard. See Fig.2-A
2. Attach the middle tube to the machine, fasten with butterfly knob. See Fig 2-B
3. Mount the throttle lever and handle as shown in Fig 3 illustration A. Ensure that the machine is in
balance and bolt are tighten.
BCU 46
Follow the mounting procedure as shown in Fig.2-A and Fig 3
1. Mount the protection guard. See Fig.2-A
2. Mount the throttle lever and handle as shown in Fig 3 illustration A. Ensure that the machine is in
balance and bolt are tighten.
Use Brush cutter and Grass trimmer
When the engine is stopped the rotating blade must be held in grass or bush until it holds still.
Always hold the machine with both hands.
The machine must not be used if the safety guard is not correctly fitted and in mint condition.
Always stop the engine before attempting to remove objects that may have stuck on the blade.
Never touch or try to stop the blade while it is still spinning.
A rotating blade may cause damage, as it continues to spin after the engine has stopped or the gas
has been turned off. Always be in control of the tool until the blade has stopped spinning.
Always make sure that the blade is mounted securely and correctly before every time is used.
Only use a sharp blade. Replace blades that are worn or damaged.
Only use original spare parts.
Only use the blade for weeds, grass and similar.
Throw back is something that may occur when the rotating blade gets into contact with something, it
cannot cut. This contact may have the effect, which the blade stops for a moment, and suddenly the
tool is thrown away from the hard object that was hit. This reaction may be so violent that the user
loses control of the tool. Throw back may occur without warning if the blade is stuck, loses speed or
impeded. This is most likely in areas where it is difficult to see the material that is being cut.
The harness must always be used and adjusted to fit in the correct manner.
Keep a firm grip on both handles while the blade is running. Keep the blade away from your body
and below your waist.
A
Engine
C
Bracket
E
Cutter – Trimmer
B
Throttle lever – Handle
D
Guard
F
Tube with lock knob *
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Texas BCU26S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Texas BCU26S in the language / languages: English, German, Danish, French, Polish as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info