703901

Teufel Cinepaq 3100 Manual

14
Zoom out
Zoom in
Previous page
1/28
Next page
14 • CP 5100 DR
Menu “ Audio”
If you are using a Teufel speaker set, you can use the
recommended values for some settings. For more informa-
tion, see “Teufel Presets” in this section.
“ Speaker Setup”
Set the speaker types. Smaller speakers may not be able
to handle low tones well and tend to distort the audio
signal; if no centre speaker is present, the voices of the
actors will be missing in movies; if no rear speakers are
present, surround sound effects will be missing. If set
properly, the CP 5100 DR is able to make optimal use of
the existing speakers:
Front – Size of the speakers to the left and right of the
screen: Small (small, compact boxes), Large (full-volume
speakers, upright boxes).
Center – Size of the middle speaker: Small, Large, Off –
with Dolby® Virtual Speaker (DVS), the mid-channel is
distributed to the left and right speakers.
Rear – Size of the rear speaker: Small, Large, Off – sur-
round sound is simulated using the existing speakers with
DVS.
Surround – Size of the rear speaker: Small, Large, Off –
surround sound is simulated using the existing speakers
with DVS.
Subwoofer – On or Off – If no subwoofer is connected,
the lowest tones will be emitted as best as possible via
the existing speakers.
Crossover – Sounds are emitted via the subwoofer up to
the frequency set here. The cut-off-frequency can be set in
the range 40 to 200 Hz. Move the marker on the scale
with the navigation buttons 40 “▲▼ ” and change the
value with the select button 41 “●”.
“ AV Mapping”
Assigning audio inputs to the video inputs: You want to
connect your PC via HDMI, but your sound card has an
optical audio output? Your DVD-changer has a compo-
nent output for video and a coax audio connection? Your
DVD receiver can handle this: Select the desired video
input and set the desired audio input for this.
Video Speaker Setup HDMI 1 HDMI 1
Audio AV Mapping HDMI 2 Aux 1
System Distance Aux 1 Aux 2
Exit Level Aux 2 Aux 3
Equalizer Aux 3 Coax 1
Teufel Preset1 Coax 2
Teufel Preset2 Opt 1
Opt 2
►
“ Distance”
If the speakers are located at different distances to the
listening position, surround sound will suffer. To com-
pensate for these run time differences, set the distances
from the listening position to each speaker from 0 to 10
metres. You can move the marker on the scale with the
navigation buttons 40 “▲▼ ” and change the value with
the select button 41 “●”.
“ Level”
Volume adjustment and sound test. Here, you can in-
crease or reduce the relative volume for each speaker.
Select the desired speaker and move the marker on the
scale with the navigation buttons 40 “▲▼ ” in the positive
(loud) or negative (soft) range. Apply the value by press-
ing the select button 41 “●”.
You can also change this setting with the special function
button “Level” (see “Special function buttons” on page
16).
With the option “Test Tone”, a noise signal will be emit-
ted from each speaker for approximately 2 seconds that
allows you to verify the settings. The test will end as soon
as you exit the submenu.
“ Equalizer”
Adjusting the sound in three frequency ranges: Select the
desired frequency range (treble, mid, bass) and move
the marker on the scale to the positive (up) or negative
(down) range using the navigation buttons 40 “▲▼ ”. You
can apply the value by pressing the select button 41 “●”.
“ Teufel Preset 1 + 2”
Presets for current Teufel speakers. Here you can auto-
matically set the recommended values for some Teufel
speaker sets (e. g. speaker size and crossover frequency).
Select your speaker set and apply the values by selecting
“OK”.
Video Speaker Setup Front Left
Audio AV Mapping Center
System Distance Front Right
Exit Level Rear Right
Equalizer Rear Left
Teufel Preset1 Subwoofer
Teufel Preset2 Test Tone
+ 10
+ 8
+ 6
+ 4
+ 2
0
– 2
– 4
– 6
– 8
– 10
►
91341 GB 20100924.indd 1491341 GB 20100924.indd 14 24.09.2010 9:58:07 Uhr24.09.2010 9:58:07 Uhr
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teufel Cinepaq 3100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teufel Cinepaq 3100 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Teufel Cinepaq 3100

Teufel Cinepaq 3100 Additional guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info