703901
11
Zoom out
Zoom in
Previous page
1/28
Next page
• CP 5100 DR 11
23
24
29 HDMI 1 and 2
You can connect a source with
a digital audio and video signal
to each socket. For this, you will
need a HDMI cable.
Please note
You can only use these HDMI inputs if the play-
back device (TV or projector) is also connected
via HDMI.
20 Coaxial 1 + 2
You can connect the coaxial digital audio outputs of two
sources here. For this, you will need a coaxial cable with
RCA plugs for each output. In the menu, you can assign a
digital audio input to each video source (see page 14).
21 Optical 1 + 2
You can connect the optical digital sound outputs of
two sources here. You will need an optical cable with a
Toslink connector. Your source requires either an optical
3.5 mm plug or a Toslink connector as well. In the menu,
you can assign the digital audio connector input to the
various video sources (see page 14).
Connecting to a power supply
Make sure that the mains switch 23 “Power” on the
back of the device is turned off (“OFF” position).
Connect the mains connector jack 24 to a mains socket
with the mains cord .
To use the remote control you will need two batteries,
type micro and/or AAA with 1.5 volts (included in the
package).
Inserting batteries
Push the battery compartment
cover on the back of the remote
control towards the arrow and
remove it.
If necessary, remove the old bat-
teries (please follow the notes on
page 26).
Insert the batteries in the battery
compartment as shown in the
gure.
Put the cover back on the com-
partment and push it into place.
Remote control
Functionality
The remote control transmits infrared control signals. For
proper functioning, you have to point the front of the
remote control towards the DVD receiver. Make sure there
are no obstacles blocking the infrared signal.
Fluorescent and energy saving lamps installed in the di-
rect vicinity may impair the functions of the remote control
or even prevent its functioning.
91341 GB 20100924.indd 1191341 GB 20100924.indd 11 24.09.2010 9:58:05 Uhr24.09.2010 9:58:05 Uhr
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teufel Cinepaq 3100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teufel Cinepaq 3100 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Teufel Cinepaq 3100

Teufel Cinepaq 3100 Additional guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info