Manual Tepro 1065N - Key West (page 17 of 24) (English, German)

716681

Zoom out

Zoom in

1/24

Attention Risk of damage!!

During use, the screws can

loosen slowly and impair the

grill‘s stability.

– Check that all screws are tightened be-

fore use. If necessary, tighten all screws

to guarantee stability.

Attention Risk of damage!!

Do not use any strong or abra-

sive solvents or scouring pads

as such products attack the

grill‘s surfaces and leave per-

manent markings.

Assembly

Preparation

Danger Risk of injury!

Failure to follow these instruc-

tions can lead to problems and

risks while using the grill.

– Follow each assembly step described

here.

1. First, read the assembly instructions

thoroughly.

2. Allow yourself enough time for as-

sembly and find an even working

space of two to three square meters.

3. Small parts such as handles may be

preassembled.

4. Look out for sharp corners and wear

protective gloves for assembly.

Required tools

1 x Phillips screwdriver

1 x adjustable wrench

Assembling the grill

1. Unpack BBQ

Unpack the BBQ and dispose of all

packaging materials. Keep the packa-

ging materials out of the reach of child-

ren and dispose of them according to

regulations after BBQ assembly. Pay

attention to the illustration of the BBQ

during assembly.

2. Fasten the handles to the fire bowl

Fasten the handles (1b) to the fire bowl

(8) with spacers (G) and nuts (F). En-

sure that both handles have bevelled

ends.

3. Fasten the long support legs

First, insert the small side of the sup-

port leg caps (9) through the narrow

ends of the long support legs (11a).

Insert two M6x30 screws (C) with a

spacer (D) through the holes on the

right side of the handle of the fire bowl

(8). Turn the long support legs (11a)

with the support leg caps (9) loosely

on the screws. Turn the long support

legs so that the holes for the storage

grille (12) point inwards. Do not tighten

the screws yet.

4. Fasten the short support legs

First, insert the small side of the sup-

port leg caps (9) through the narrow

ends of the short support legs (11b).

Insert two M6x30 screws (C) with a

spacer (D) through the holes on the

left side of the handle of the fire bowl

(8). Turn the long support legs (11a)

with the support leg caps (9) loosely

on the screws. Turn the short support

legs (11b) so that the flat bottom sides

with the holes for the storage grille

(12) point inwards. Do not tighten the

screws yet.

P180198_TEPRO_1065N_KeyWest_K_DE_GB_20191016.indd 17 16/10/2018 6:26 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tepro 1065N - Key West in the language / languages: English, German as an attachment in your email.

The manual is 1,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tepro 1065N - Key West Manual

Product: