742851
37
Zoom out
Zoom in
Previous page
1/46
Next page
i
ii
is the registered trademark of Shenzhen Tenda Technology Co., Ltd. All the
products and product names mentioned herein are the trademarks or registered trademarks of their
respective holders. Copyright of the whole product as integration, including its accessories and
software, belongs to Shenzhen Tenda Technology Co., Ltd. Without prior expressed written
permission from Shenzhen Tenda Technology Co., Ltd, any individual or party is not allowed to
copy, plagiarize, reproduce, or translate it into other languages.
All photos and product specifications mentioned in this manual are for references only. Upgrades
of software and hardware may occur; Tenda reserves the right to revise this publication and to
make changes in the content hereof without obligation to notify any person or organization of such
revisions or changes. If you would like to know more about our product information, please visit
our website at http://www.tendacn.com
iii
Contents
Contents .......................................................................................................................................... iii
Chapter 1 Product overview .............................................................................................................. 5
1.1 Package list ......................................................................................................................... 5
1.3 Introduction ......................................................................................................................... 5
1.4 Features ............................................................................................................................... 5
1.5 Hardware overview ............................................................................................................. 6
Chapter 2 Installation ........................................................................................................................ 7
2.1 Desktop Installation ............................................................................................................ 7
2.2 Wall install .......................................................................................................................... 8
Chapter 3 Smartphone View and Install ........................................................................................... 9
3.1 “CloudNeteye” download and install .................................................................................. 9
3.1.1 iPhone....................................................................................................................... 9
3.1.2 Android smartphone ................................................................................................. 9
3.2 Add IP Camera .................................................................................................................... 9
3.2.1 IOS ........................................................................................................................... 9
3.2.2 Android .................................................................................................................. 11
3.3 CloudNeteye Live View .................................................................................................... 12
3.4 IP Camera setting and management .................................................................................. 12
3.4.1 Android smartphone ............................................................................................... 12
3.4.2 IPhone .................................................................................................................... 14
Chapter 4 PC View and Install ........................................................................................................ 17
4.1 Software function specification ......................................................................................... 17
4.1.1 Add/Delete IP Camera ................................................................................................... 17
4.1.2 Video display ......................................................................................................... 18
4.1.3 Main Functions ...................................................................................................... 18
4.1.4 Windows switching area ........................................................................................ 22
iv
4.1.5 Device setting ......................................................................................................... 22
Chapter 5 Web View and Setting .................................................................................................... 25
5.1 How to login Web ............................................................................................................. 25
5.2. Web Set ............................................................................................................................ 27
5.2.1 View video ............................................................................................................. 27
5.2.2 Running .................................................................................................................. 29
5.2.3 Video Set ................................................................................................................ 30
5.2.4 Network Set ............................................................................................................ 32
5.2.5 WIFI ....................................................................................................................... 35
5.2.6 Alarm Set ............................................................................................................... 35
5.2.7 Advanced Set ......................................................................................................... 38
5.2.8 System Set .............................................................................................................. 41
FAQ ................................................................................................................................................ 44
5
Chapter 1 Product overview
1.1 Package list
Please check carefully if all listed items are included in the package as below:
1. IP-Camera
2. Quick Installation Guide
3. Mounting Bracket set
4. RJ45 Cable
5. Power Adapter
Please strictly follow the input voltage power of the adapter required, or it will damage the device
and this situation does not belong to the range of warranty. After purchase, if any accessories
mentioned above is missing or damaged, contact the place of purchase immediately.
1.2 System Requirement
1. CPU: 2.0GHz or above (recommend 3.0GHz)
2. RAM: 256MB or above (recommend 1.0GB)
3. Graphic card: 64MHz or above
4. OS: Windows 7, Vista, XP, Mac OS, Windows 8
5. Internet Explorer6.0 or above, or compatible browser, Firefox etc.
6. Android 2.3 or above
7. IOS 4.3 or above
1.3 Introduction
Tenda super easy IP Camera provides a professional home or small business surveillance Solution.
Through our mobile phone APPS “CloudNeteye” and PC software “CloudNeteyeForPC” users
can remote view directly, without DDNS domain name or setting any Port mapping on Router.
1.4 Features
1. HD plus IRCUT(HD series)720p HD Video Quality, you can get rich detail and crisp image
quality. With IRCUT to ensure that the images are real color.
6
2. Plug and Play: Based on P2P cloud Technology, no need to configure the wireless Router and
DDNS, then you can view immediately, so easy.
3. Remote ViewingUser P2P APP you can remote view through the iPhone, Android phone, PC.
4. H.264 Video CompressionH.264 video compression technology, need the minimum
bandwidth network traffic while high image quality, more suitable for smartphone viewing.
5. Night Vision: This device can work well during the day, with infrared LED, it can also work at
the night, round-the-clock surveillance.
6. Wi-Fi Connect: Use WiFi, camera easily connect to a wireless Router. You can easily get rid
of the trouble of deployment the Ethernet cable.
7. Micro SD/TF storageYou can store image and video on your Micro SD/TF card.
8. Motion detection and alarmIf you need to monitor a certain area, when an exception occurs
in the region, trigger an alarm automatically, send alarm information by e-mail, FTP.Note:
communication need to connect external audio.
9. Two-way audioNot just screen monitor, you can also voice intercom. When you find the
abnormal situation, you can be reminded by voice intercom, to ensure safety. (The speak function
need additional audio to support)
10.Wide angle lens:1080P HD lens,120 degree, f=2.8mm,F=2.0,support IRCUT
11. Support ONVIF
1.5 Hardware overview
1
2
3
4
5
6
7
8
10
7
C5s
1. IR LED
2. Lens
3. Photodiode
4. Indicator LED
5. MIC
6. RJ45
7. Power
8. Audio out
9. T/F: TF Card Slot
10. Reset
Chapter 2 Installation
2.1 Desktop Installation
8
1. Take out the camera.
2. Connect the included power adapter to the camera.
3. Then connect Ethernet cable between the camera and LAN port on your Router.
Please ensure the DHCP function of your Router is enable.
2.2 Wall install
According to your needs, refer to the figure to install.
1 : Take out the bracket, and fix it by the screws.
2 :Turn the spindle on the bracket to be loosen.
3 : Camera connect to bracket, turn the collar on the bracket clockwise to tighten it
4 : Adjust the camera to the location you needed, turn the spindle and fix it.
9
Chapter 3 Smartphone View and
Install
3.1 CloudNeteye download and install
You can choose the following way to download and install "CloudNeteye".
3.1.1 iPhone
Serach “CloudNeteye” in APP Store, download and install.
3.1.2 Android smartphone
Search the " CloudNeteye" from “Google play,download and install. If you do not have “Google
play” in smartphone, please downloand and install it at first.
3.2 Add IP Camera
As following, we will introduce how to add IP camera based on different operating systems IOS
and Android.
3.2.1 IOS
10
1. Run “CloudNeteye” APP on your IPhone.
2. You can choose one of following way A. B. C, to add camera.
A: If your iPhone and IP camera is connected to the same Router, “CloudNeteye” will search the
IP Camera automatically, and appear in the following screen.
You just need to click the camera UID Number , input password"admin "; then click "Save" to
finish add camera.
For some reason if your IPhone can't find camera automatically, pls click “Add” or “QRCode” as
the following screen.
B: Recommend to scan QR code to add camera. Click “QRCode”, and scan the UID QR code at
the bottom of the camera; input password “admin”; click “Save” to finish add camera.
C: Also, you can click “Add” to input camera UID number manually. (UID number is 20
alphanumeric below the UID QR code). Then input password “admin”, click “Save” to finish add
11
camera
Note: Because the UID number is case sensitive, please input the correct font format.
3.2.2 Android
1. Run “CloudNeteye” on your smartphone.
2. Touch “Click here to add camera” in the following screen.
3. You can choose one of following way A. B. C, to add camera.
A: If your smartphone and IP Camera is connected to the same Router, click “Search” to add
camera, as show in the following screen. Touch the UID number, then input password “admin”,
click “OK” to finish add camera.
For some reason if your smartphone can't find camera automatically, pls click “Scan” to add.
B: Scan the UID QR code at the bottom of the camera, input password “admin” , Click “OK” to
finish add camera.
C: Input UID number manually as show in the following picture; then input password" admin ",
12
click “OK” to finish add camera. (UID number is 20 alphanumeric below the UID QR code)
Note: Because the UID number is case sensitive, please input the correct font format.
3.3 CloudNeteye Live View
After finish add IP camera(camera shows on line), you can view video, snapshot, mute,listen and
speak etc.
3.4 IP Camera setting and management
3.4.1 Android smartphone
13
Select device and hold on 3 seconds or click button near the device to do parameters
settings. User can set reconnect, edit camera, view snapshot and remove camera.
3.4.1.1 Modify Camera
Enter Edit Camera” to do two settings as below:
1. Device Setting
2. Advanced Setting
14
Advanced Set
a. Can modify the camera’s password
b. Can adjust common video parameters: video quality, video flip, video mirror, Environment
mode
c. WiFi setting
Click “Manage Wi-Fi networks” to enter searched wireless list, and then you can select usable
wireless network.
d. Even Setting
1. Motion detection: If this function OFF, then the camera don’t send motion detction alarm. If
choose Low\Medium\High\Max means motion detection function ON. When sensitivity higher,
then the camera trigger alarm more easily; default area is full screen.
2. Notification: There is 4 alarm modes, Silent, Tones only, Vibrate only, Ringtone and Vibrate.
e. Recording Setting: There is 3 options, Off, Full time, Alarm. If choose “Off”, camera stop
recording; if choose “Full time”, camera record all day; if choose “Alarm”, camera start recording
after motion detection (need device’s motion detection ON, and insert MicroSD/TF card).
f. Format SDCard: click this button, format MicroSD/TF card (need camera with memory card,
otherwise without this button)
g. Device Information: Display Model, Version, Vender, Total size, Free size.
3.4.2.1 View Event
Click View Event, can check full time recording and motion detection recording.
3.4.2 IPhone
15
Click ” button beside the camera list, can do parameter settings and reconnect camera. User
can view event, add camera, view info.
3.4.2.1 Modify camera
a. Security Code: can change the camera password
b. Video setting: can adjust common video parameters: Video quality, video flip, video mirror,
Environment mode
16
c. WiFi: Click WiFi to enter searched wireless list, and then you can select usable wireless
network.
d. Motion Detection: If this funtion OFF, camera can’t send motion detection alarm. If choose
Low\Medium\High\Max means motion detection function ON. When sensitivity higher, then the
camera trigger alarm more easily; default area is full screen.
e. Recording Mode: With 3 options Off/Full Time/Alarm. If choose “Off”, camera stop recording;
“Full time”, camera will record all the time; recommended “Alarm”, camera record after trigger
motion detection alarm (need motion detection function ON and device with MicroSD/TF card)
f. Format SDCard: click this button, then format the memory card (need camera with card,
otherwise, without this option
g. About Device: dispaly camera model, version, vender, total size and free size of memory card.
3.4.2.2 Event
It can view the full time recording or alarm recording of camera.
17
Chapter 4 PC View and Install
Visit Tenda official website www.tendacn.com, search your model on the top right corner, click
and enter the product you found. Click the Downloads and get the "PC P2P remote Software",
install "CloudNeteyeForPC" after decompressed.
4.1 Software function specification
Below pictures are the screenshot of CloudNeteyeForPC”, we will explain detailed based on the
below 4 functions:
4.1.1 Add/Delete IP Camera
Add/Delete IP camera can search or manually add IP camera, can support max 16
cameras view at the same time. (When the button is in blue color, then you can add or delete).
Click the blank of camera list, then click button , click and search the connected camera in the
popup menu, double click the camera you found, the UID bar that is the UID bar of the camera.
Input the camera name you set (Letter and number), then input the default password admin or
modify the password and click save to finish adding camera. Then you can see the camera in the
camera list. You can also input the camera name, UID bar and password and click save, but you
need to ensure the camera and computer in the same LAN.
18
Select the camera in the camera list, click delete camera button , then delete camera.
4.1.2 Video display
A. Show IP cam info, include name, connection way (LANP2PRLY), resolutions and FPS.
B. Record manually. Click this button, when it shows in red, recording start; click again, recording
stop. This function is available when full time or schedule recording closed.
C. Control the IP Cam rotation manually. (C5s do not support this function).
D. Two-way audio function, include listen and speak (Need additional audio to support speak
function).
E. Snapshot function.
F. Disconnect IP Cam function by manual.
G. When IP Cam connect as Relay, connection will close automatically after 1 minute. Users need
re-connect the camera manually. When disconnect, recording and alarm function is not available.
4.1.3 Main Functions
4.1.3.1 System setting
19
Click the setting button on the top right corner CloudNeteyeForPC and enter the
system setting, as shown in the following photo:
A: Snap shot and video recording path setting.
Users click “ to choose the disk and file in your computer to save snapshot and video
recording.
Users can set the length of single recording.
Users can set the camera stop recording when how many free space left in your disk.
Users can set to remove old video recording file when the free space is lower than setting.
B: Alarm settings
This function is available in condition of motion detection. When users closed motion detection in
smartphone APP setting, camera can’t alarm triggered.
Alarm can set as following:
1) Event recording, please see 5.4 for reference.
2) Alarm sound effect, users can set the sound all wav format file in your computer.
A
B
C
20
3) Send email when alarmusers can set their email address through Mail Setting.
Note 1The following form is the parameter configuration of different email server:
Email server
SMTP host
SMTP host port
Yahoo
smtp.mail.yahoo.com
25
Sohu
smtp.sohu.com
25
Gmail
smtp.gmail.com
465
Tom
smtp.tom.com
25
After fill the information, please click “Test”, choose “Allow” in appear tips, and click “Save” to
finish all email setting.
Please see below picture for reference:
C: Misc setting
1) Set display language
21
2) Set if close the status bar
3) Confirm when application close
4) Can choose if enable the login form
5) Set all device will be connected when program is started.
6) You can modify the password of the camera here.
4.1.3.2 Playback, Browse snapshots and Event list
Click the button on the top rigth corner of CloudNeteyeForPC. Do the following
operations.
1) Playback
Search function, users can search all recording files of one or more camera in a certain time.
Delete function, can delete unnecessary files.
Users can view the payback of the recording, include play, pause, stop, drag watch and full screen
view.
Snapshot function, check snapshot pictures.
Event list
22
Search function, users can search all even list of one or more camera in a certain time.
4.1.3.3 Software
Click the button on the top right corner of CloudNeteyeForPC, you can get the version
information of software.
4.1.4 Windows switching area
Display split, include 4, 6, 9, 16 split pane, double click to full screen view. When several camera
work together, you can select the suitable window to view, double click the camera can view in
full screen. You can also select to move the camera and the frame of camera.
4.1.5 Device setting
4.1.5.1 Edit Camera
23
Choose some one IP camera in device list, click “ ”, can do “Schedule Recording”, “Remote
Setting” and “Remote Device Info”
4.1.5.1.1 Schedule Recording
1) Full-time recording. When open this function, manual recording function will stop.
2) According to the schedule. When this function start, manual recording function will stop.
3) Event recording. This function is available in condition of motion detection. When users closed
motion detection in smartphone APP setting, camera can’t alarm triggered.
4.1.5.1.2 Remote setting
Include Device password setting, WIFI setting, Camera Video Quality, Video Flip, Environment
Mode and Motion Detection settings.
WiFi setting: click “Manager WiFi Network” click “WIFI SSID”, choose one available
network in the following list; input password, then click “Save”.
24
4.1.5.1.3 Remote device information: check the camera info
4.1.5.2 Play/Stop all camera
“Play/Stop” all camera connected button , can support max 16 camera connect or stop at
the same time.
4.1.5.3 Export/Import device
Click export or import the button , camera’s data will be import or export in form of
text.
25
Chapter 5 Web View and Setting
5.1 How to login Web
You can log in the Web through the following two ways:
Way 1: RunC5s Setup Wizard” to enter Web.
Visit Tenda official website www.tendacn.com, search your model on the top right corner, click
and enter the product you found. Click the Downloads and get the "Setup Wizard" and "User
Manual".
Double click “C5s Setup.exe”, run this software, click “next according guide info, until to
following page.
1. As shown on the picture, click “ , (please close the firewall and antivirus software
in your computer and make the DHCP server is ON in your Router); select camera in “Device
list”.
2. Select the camera from the device list.
26
3. Click “ ”, input “admin” in both user name and password on the appearing login
window, and then click “LOGIN” to enter the Web UI. You will then be able to watch videos or
do system setting. If you need to modify the IP address, please refer to the help item on the right
“How to Modify the Device IP config.
The first time user enter into the UI, it will remind user to download player, click add in item
which under the address bar or “download player and then install. As shown in the following
photo:
Open the loaded the folder and then double-click IPCamera.exe, select the installation path and
install video control.
Click here to run the add in
item and install the Player
Click here to
add the Playr
27
User also can click and install the download play on top right corner web UI as below:
Way 2: Use “CloudNeteye” APPs in smartphone, search camera and find IP address, then input
the IP address in browser to enter the Web. Please refer to User Manual “3.2 Add IP Camera”
section, use search IP camera function. In the device list info “192.168.X.X” means the camera’s
IP address. Open a browser in your computer, input the IP address and press “Enter”, input
“admin” in both user name and password on the appearing login window, and then click “LOGIN
to enter the Web.
5.2. Web Set
5.2.1 View video
C. Control the IP Cam rotation manually.
Double click IP
Camera.exe and
install
28
1) Status bar
a. Monitor function button :Click the button,turn it like this ,you can hear the voice
from camera, click it again , it close and you can not hear the voice.
b. Communication button . Click the button, turn it like this , the voice will be
sent to the camera, click it again ,it close and the voice can not be sent to camera.
(Note: The speak function need additonal audio to support)
2) Multi-language mode selection
You can select simplified Chinese/Chinese Traditional/English/multi-language.You can
select 720P (Image quality is best), VGA (Image quality is good) to view video, for example,
using 720P under local area network, using VGA when the video is not smooth
3) Snap/ record/TF/SD card/ replay
Click” snap”, it will have a small window to show the photo snapped, click save to save the
photo.
Click” record”, start record. Click again the “record”, and then stop recording. You can chose
where you want to save the record.
1
2
3
4
29
Click “TF/SD”, the contents of TF/SD card will be shown in the pop-up page (if have install
TF/SD card. You can select the contents in the card and download.
Click reply, it will pop-up a media player which can play video.
The device supports max 32G MicroSD card. Please format the MicroSD card to FAT32
before use the card on camera. Please check if the TF/SD Card matches the camera or not
before purchasing the TF/SD Card.
Please insert the TF/SD card when the device power off, otherwise it will damage the
TF/SD card or the device can’t read the card.
4) Click SYSTEM”, enter device configuration UI, you can configure your camera.
5.2.2 Running
30
You can check some information of the device, such as software version, web version, Mac
address, TF/SD card status.
5.2.3 Video Set
5.2.3.1 Video parameter
31
5.2.3.2 Video attribute
1) Click , and then click to adjust the ightness, color and
so on, so that can change the image quality.
2) Flip vertical and flip horizontal can adjust the video picture to up, down, left and right. This
can be use when device is installed in ceiling.
3) Frequency setting that is video lighting electric frequency rate adjustment, if the picture has
corrugation, it can be adjusted another frequency to remove the corrugation
4) When IR LED control is” auto”, and the external light is dark to some degree, the image is
black and white, if it shows the black and white status, but it is not night, you can close
infrared, then it can be normal. If the IR LED is closed at night or do not have light, the
camera is blind
5.2.3.3 Voice set
32
It can adjust the voice of monitor and communication, the bigger the value, the bigger the voice.
Please click Apply after modified parameter.
5.2.3.4 OSD
It can change the name of camera while chose to turn on or turn off the video time and name.
Please click Apply after modified parameter.
5.2.4 Network Set
5.2.4.1 Network Parameter
There are both two way to obtain IP address and DNS setting. One is the fixed IP address, one is
dynamic IP address configuration. The camera defaults to obtain IP Address Automatically”. User
can chose dynamic IP address and DHCP service, then the Router which connect with your
camera will assign an IP address to your camera automatically, setting the interface configuration
33
as default. Input the website in wan test bar for testing, such as input www.tendacn.com.cn, click
it. If it works, then your camera connecting is success.
If the Router do not connect to the internet, the camera also can connect with computer via Router
(LAN), but it will not success if you do the WAN test.
If you want to modify the IP address, select the “fixed IP address”, modify the last section of IP
address, click the “SET”. The following picture is only for reference, please modify the IP address
according to your network environment.
The default HTTP port is 80, if you do not modify the port, you can directly enter the camera IP in
the web address field; if you change the port, you need to add ":" and port number behind the IP
address. For example: If you modify the port is 8081, the camera IP address is 192.168.0.10. You
must enter 192.168.0.10:8081 to access camera.
34
Camera support RTSP, if enable RTSP for verifying, you need to input the user name and
password when use RTSP to call the video.
When you modify the parameters, you need to click Save to save your settings.
5.2.4.2 Remote Access Setting (DDNS)
User can use third party DDNS, such as www.dynddns.org, just need to log in to the website to
apply for a free domain name, fill in the Settings box, and save the settings. Do the port mapping,
then you can remote access your IP camera.
IP camera default to obtain the IP address automatically, if you need to remote access via DDNS,
the IP address should be manually to be fixed IP address, or it can’t port mapping.
When use third party domain name, if the port number is not 80, you need to add a colon behind
the domain name and plus the port number, such as: http://chen.dynddns.org:8081.
1. Problem of setting remote access, please refer to Addendum1
2. Please click Apply after modified parameter.
35
5.2.5 WIFI
Select “Enable” and click “Scanning”, and then select wireless Router in WiFi List, enter its
password, click Save to save the wireless settings. After setting successfully, please pull out
network cable, then you can use the wireless function.
When you modify the parameters, you need to click Save to save your settings.
5.2.6 Alarm Set
If users set to monitor certain area, when there is exception occurs in this area, it will trigger alarm,
then can select motion detection. In the item of sensitivity, the higher the sensitivity value, the
easier to trigger alarm.
When the motion detection area is selected and applied, set the alarm mode (such as starting an
e-mail alert settings Email success) as well as selected arming time, when an exception occurs
within the selected area arming time will trigger an alarm, send pictures to corresponding mailbox.
36
1) Area
Enable the "Motion Detection function" , that is you need to set the motion detection area.
Meanwhile you can choose high sensitivity ,medium or low in the monitor area.
2) Alarm
37
a)Alarm Setting
It can select several alarm way after triggered alarm.
b)Time SettingArming time is the time in the selected Arming, if exception occurs, alarm
will be triggered. Arming time defaults for all time. The Arming time corresponds to motion
detection alarm and audible alarm.
The device will be trigged only in the period of arming time which have detected alarm, you can
select the arming time according to your needing. Below picture is setting arming in 8:30-9:30
Monday. Click the square corresponding to arming time when setting, it will turn green after
selected.
When setting time section, please adjust the system time at first. Please refer to 5.2.9.2 and set up
system time.
Click Apply after modified parameter.
38
5.2.7 Advanced Set
5.2.7.1 Automatic Capture
Automatically take photo: During the selected time section, take a photo in each time interval and
send it to your mailbox. Select the capture, and then set the time section that you want to capture
photo.
Below is the image of 8:30-10:30 Saturday. Click the square corresponding to Arming time when
setting, it will turn green after selected.
Click Save after modified parameter.
5.2.7.2 Email
When detects alarming, it can send email to your appointed email box, but you need to set email
service parameters correctly. As shown below, click “Save” to save these parameters. Below is
email setting example, click set and save the parameter, and then click test. It can be checked if
this setting is success (user name and sender use the same email, the password is the password of
your mail box. Select your mailbox server which your user name belong to, to be the name of
server. Below for your reference.
39
The contents filled in this photos is required item, you will fail to set the email if some contents is
incorrect.
After fill all parameters, please click “Send Email” to send test email.
Click Save after modified parameter.
5.2.7.3 FTP
The device will snap live pictures and send them to FTP server when alarming and FTP can store
video, but need to set the FTP setting correctly.
Before to use FTP function, please get the following ready.
40
1) FTP user name and password
2) FTP storage space and the authority
3) Create sub-category to store the video or pictures.
5.2.7.4Record to TF/SD card
Record to TF/SD card: start record to TF/SD card, it will automatic record and save to TF/SD card
in the selected time section.
Below is the image of 13301630 Tuesday. Click the square corresponding to Arming time
when settings, it will turn green after selected.
Click the Save after modified parameter.
41
5.2.8 System Set
There are 2 levels of user authorization in it.
Administrator: “admin” has the highest authority, can do any settings. The factory default
password: admin.
Guest: User can view the video, but can’t operate the device. The default password is guest.
Please change these 2 level passwords when your first use to ensure your safety.
Click Apply to save the settings.
5.2.8.1 Time Set
First time you use the camera, maybe the time on the picture is incorrect. Because camera need to
get current time by Internet. If the camera can connect to Internet, the time of the camera will
update automatically in a moment.
User can select the time zone
Click Save to save the settings.
5.2.8.2 Initialization
42
Reboot: When upgrade camera firmware, it will automatic restart camera. ”Audio format” will
automatic restart camera.
Factory Default: Enable the camera back to factory setting.
Backup Data: If the back set up to date, the camera generate a file that you can save in your
computer, and you can directly import the file when needing. Your computer can back to the
parameter as you set before. This function is to facilitate the user to manage camera and do not
need to set the parameter any more.
Upgrade: Upgrade firmware is to upgrade camera system firmware and web, recovery and restore
your saved settings parameters.
5.2.8.3 System log
43
System log is to record the user operation and alarm event, it shows the operation and the time of
event.
44
FAQ
1. After I connect the camera according to guide of Setup Wizard, and add camera by smartphone
scanning UID QR code, it shows Unknown device. Why?
When you run CloudNeteye for the first time, make sure your smartphone and camera connect to
the same Wi-Fi Router.
(1) Check the camera’s power connection is normal or not. Check the camera’s LED is on or not,
if not bright, then check the camera’s power connection.
(2) Check the camera connect to Internet correctly or not.
Camera must connect to the Router’s LAN port, and check the Router’s LAN port LED is on or
not. If no light, replace the Ethernet cable and try again.
The camera is unable to connect to the port of DSL MODEM, Cable MODEM, PON MODEM
that cascade to the Router.
(3) If still can’t view camera, enter Router configuration page to check if the DHCP function is
ON.
Verify that DHCP function is ON. Because IP Camera’ IP default to obtain from DHCP server.
2. When view with smartphone, camera shows On Line, but the picture is black screen, and need
wait for a moment, then the image display correctly. Why?
Because the video quality level is setted up too high, and the network is not good enough, so the
camera response delayed. Change setting according to the next steps: Click “ ” or “
Click Edit Camera or Advanced Setting Video Quality, reduce a level (quality levels are
Max/High/Medium/Low/Min).
3. Run CloudNeteye APP on smartphones, why can't search camera?
Before running CloudNeteye APP, please according to the quick installation guide instruction,
run setup wizard, complete the camera configuration.
Before running CloudNeteye APP, please ensure that your smartphone and the camera is
connected to the same Router. Smartphone can via WI-FI to connect to the Router.
4. Why I fail to recording. When click Record to TF/SD Card, then click Apply to save setting,
But after I refresh the page, the status still “Off”. Reset browser first: Tool Internet
45
OptionAdvancedReset. Close browser, and enter again. If the problem is still not solved, then
because that browser is not compatible with. Change another browser, like IE6, IE8 and so on.
5. Why videos on camera are not true in color?
Cameras with CMOS chips are sensitive to light. Videos may not look good in color with dark
light or equipped infrared lens. To avoid this problem, please use CMOS cameras with dual filter
or a color lens.
6. Why smartphone viewing image is not clear?
Because the CloudNeteye default value of video quality is low, so the resolution is limited, you
can set by yourself. Run CloudNeteye, find the small triangle in device list, touch it enter into
Edit camera >Advanced Settings >Advanced >Video setting>Video Quality page, change
video quality to “Medium “High” or “Max”. Note: The video quality is higher, the greater
consumption of mobile broadband traffic. To save your smartphone broadband traffic, select the
appropriate video quality.
7. Why my camera cannot connect to the existing wireless Router?
Before you connect to the existing wireless router, you must first connect your PC to the camera
via an Ethernet cable and then enter WEB UI to configure some basic settings, or use
CloudNeteye” or “CloudNeteyeForPC” to set WiFi.
8. My camera cannot be reset. What should I do?
Press the Reset button for about ten seconds when your camera is connected to power source.
9. Why do I have to reconfigure the camera to wirelessly connect to my wireless Router every
time when the Router restarts? Sometimes I cannot even search the wireless network of my Router.
A. Manually set your wireless Router’s channel to any number between 1and 11. Do NOT use
channel 12 or channel 13.
B. Make sure your Router’s SSID is a combination of letters and numbers and does not include
any special characters, Chinese characters or symbols!
C. Manually specify your wireless Router’s security settings, say, WPA2-PSK, AES. Do NOT use
the Auto option.
D. After you configured your Router as required above, connect your PC to the camera via an
46
Ethernet cable.
E. Open camera’s web page, search and select the Router’s SSID.
F. Enter the Router’s security key.
G. First disconnect the Ethernet cable and power supply from the camera and then reconnect the
camera to a power source.
H. Restart the camera and the problem will be resolved.
10. Why it is too slow when watched from my phone?
Please watch it via a 3G or WIFI connection. 2G connection may not be good enough for the
service. But sometimes the 3G network is not nice either. Try lowering the resolution on your
mobile phone if you use a H.264 format camera.
11. Is the camera’s wireless connection secured? Can others connect to my camera?
The camera’s wireless connection is well secured with WEP/WPA/WPA2 wireless encryptions.
12. What wireless protocols does the camera support?
It supports 802.11b/g/n and wireless transmission rate up to 150Mbps.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda C5s at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda C5s in the language / languages: English as an attachment in your email.

The manual is 2,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info