519065
18
Zoom out
Zoom in
Previous page
1/44
Next page
Programming by Manual Code Search
Facility to manually search the entire Code Library for a particular device that may not be listed in
the Library or listed under a different Manufacturer.
a. Turn on the device to be controlled.
b.
Press and hold Setup key until “CODE SETUP” is displayed (takes approximately 2-3 seconds).
c. Release Setup key.
d. Press and release OK key. “CODELISTE AUFR.” is displayed.
e. Navigate to “CODE SUCH”. Press and release the OK key. “QUELLENTASTE” is displayed.
f. Press and release desired Mode key (TV, VCR, DVD, etc.). “GERAET? TV” is displayed.
g. Using the Up/Down keys, select the Device type to be programmed (TV, VCR, DVD, etc. –
see “GERAET?” note above). Note – For TV Mode, only TV “Device” can be selected. Press
and release the OK key to confirm selection.
h. “FUNKTION TEST” is displayed. Press the Program Up key (or Power or Play (VCR only))
repeatedly until the Device to be controlled changes channel, turns off or responds
accordingly. “SUCHEN” will be displayed (along with the Device selection) during the search
process. If the required Code is accidentally passed then press the Channel Down key to
backtrack through the Library. Press Channel Up (or Power or Play) to change direction
forward again. Press and release OK key to install the Code.
i. “FERTIG” will be displayed and the remote will exit Setup and return to normal operation.
When all codes have been searched “SUCHE ENDE” will be
Suche Set
displayed and remote returns to normal operation. EnDe
Programming by search for Brand names
Facility to manually search specific Brands within the Code Library for a particular manufacturer.
a. Turn on the device to be controlled.
b.
Press and hold Setup key until “CODE SETUP” is displayed (takes approximately 2-3 seconds).
c. Release Setup key.
d. Press and release OK key. “CODELISTE AUFR.” is displayed.
e. Navigate to “HERSTEL.-CODES”. Press and release the OK key. “QUELLENTASTE” is
displayed.
f. Press and release desired Mode key (TV, VCR, DVD, etc.). “GERAET? TV” is displayed.
g. Using the Up/Down keys, select the Device type to be programmed (TV, VCR, DVD, etc. – see
“GERAET?” note above). Note – For TV Mode, only TV “Device” can be selected. Press and
release the OK key to confirm selection.
“HERSTEL.-CODE” is now displayed. Press and release the numeric key (0-6) corresponding
to desired Manufacturer
1. Philips
2. Sony, Panasonic, JVC, Toshiba
3. Thomson
4. Telefunken
5. Grundig
6. Nokia
0. Alle anderen Marken für diese Gerätegruppe).
h. “FUNKTION TEST” is displayed. Press the Program Up key (or Power or Play (VCR only))
repeatedly until the Device to be controlled changes channel, turns off or responds
accordingly. “SUCHEN” will be displayed (along with the Device selection) during the search
process. If the required Code is accidentally passed then press the Channel Down key to
backtrack through the Library. Press Channel Up (or Power or Play) to change direction
forward again. Press and release OK key to install the Code.
i. “FERTIG” will be displayed and the remote will exit Setup and return to normal operation.
18
55415 BedienAnltg TeFu_Zweite Version 08.12.09 16:32 Seite 18
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telefunken TRC 850 - 8in1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telefunken TRC 850 - 8in1 in the language / languages: German as an attachment in your email.

The manual is 2,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Telefunken TRC 850 - 8in1

Telefunken TRC 850 - 8in1 User Manual - English - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info