519065

Telefunken TRC 850 - 8in1 Manual

16
Zoom out
Zoom in
Previous page
1/44
Next page
16
Normal Display
The display is always on when batteries are installed, normally displaying the active Mode of the
remote e.g. DVD, the day of week e.g. Mon, and time of day e.g. 23:58, in 24 hour format.
Mode Keypress Display
Pressing a Mode key changes remote operation to that Mode and displays the active Mode and
its code e.g. DVD and the programmed 4-digit code e.g. 0768. Display returns to Normal display
on Mode key release.
Setup (Shift) Keypress Display
Pressing and releasing the Setup key displays the active Mode of the remote e.g. DVD, the Date
e.g. 9:10 (Day: Month) and indicates “Shift” operation with “(S)”. Press and release Exit to return
to normal display.
Shift Function
Some keys of the universal remote control can be allocated twice. To use these functions press
and release the Setup key (S is displayed on the LCD screen) followed by the desired secondary
function key. If no key is pressed after the Shift key the remote will time-out to normal
(non-shifted) operation after 15-20 seconds.
IR Transmission
Once a key has been pressed (and not released) the remote is programmed to cease
IR transmissions after 255 IR message transmissions (approximately 30 seconds depending on
actual code programmed). This is to prevent battery drain should a key become “stuck” inadvertently
e.g. the remote may become trapped down the side of a chair with a key depressed.
Keypress Indication
Keypresses are indicated by either a “transmit” symbol in the LCD display or by a change of
screen display.
Power-On Default
The remote will always power-on in TV Mode on battery insertion.
TV Mode
Only a TV code can be programmed under the TV mode key.
Setup Screen Navigation
To entry the Setup Menu, press and hold the Setup key until “CODE SETUP” appears in the
display. The “SET” symbol will always be shown when the remote is in Setup. Successive presses
of the Setup key will present available Setup options:
CODE SETUP > SYSTEM SETUP > TIMER SETUP > LERNEN SETUP > MACRO SETUP > SETUP VERL.
Press OK to select the desired programming step required.
Use the Setup, Okay, Up, Down, Left and Right arrow keys for Setup screen navigation and
selection. To exit Setup routines and return to normal operation, press the Exit key or navigate to
the “EXIT SETUP” screen and press Okay. Completion of some Setup routines will automatically
return the remote to normal operation.
Exit from setup
Exit from Setup will also occur automatically after approximately
Timeout
15 seconds if no key is pressed. “Timeout” will be displayed.
When the remote is busy processing in Setup routines,
Warten...Set
“Warten” will be displayed.
1
CODE SETUP – press OK here to program a Mode e.g.
Code Entry, Search, etc. See Code Setup options below.
CODE- SET
SETUP
2
SYSTEM SETUP – press OK here to set Time, Date,
Volume Control, etc.
SYSTEM- SET
SETUP
3 TIMER SETUP – press OK here to set Timer events.
TIMER- SET
SETUP
4
LEARN SETUP – press OK here to program a Mode
with Learned commands.
LERNEN- SET
SETUP
5 MACRO SETUP – This function is not available.
MACRO- SET
SETUP
6
EXIT SETUP – press OK here to Exit Setup routines
and return to normal operation.
SETUP- SET
VERL.
55415 BedienAnltg TeFu_Zweite Version 25.01.10 11:17 Seite 16
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telefunken TRC 850 - 8in1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telefunken TRC 850 - 8in1 in the language / languages: German as an attachment in your email.

The manual is 2,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Telefunken TRC 850 - 8in1

Telefunken TRC 850 - 8in1 User Manual - English - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info