519065
17
Zoom out
Zoom in
Previous page
1/44
Next page
Code Setup Options:
Pressing OK at CODE SETUP presents 4 options for programming a Mode
with codes.
Programming by using the on-screen Code List
a. Turn on the device to be controlled.
b.
Press and hold Setup key until “CODE SETUP” is displayed (takes approximately 2-3 seconds).
c. Release Setup key.
d. Press and release OK key. “CODELISTE AUFR” is displayed.
e. Press and release OK key. “QUELLENTASTE“ is displayed.
f. Press and release desired Mode key (TV, VCR, DVD, etc.). “GERAET? TV” is displayed.
g. Using the Up/Down keys, select the Device type to be programmed (TV, VCR, DVD, etc. –
see “GERAET?” note below). Press and release the OK key to confirm selection.
h. The first Code List Brand and Code will now be displayed (e.g. Admiral 0000). Use Up/Down
keys to select the Brand and Left/Right keys to select the code. Codes can be functionally
tested on the target Device using the Digit 0-9, Volume, Mute, Channel, Power, AV, Teletext,
Play, Stop, FF, Rewind and Pause keys. Once the correct code has been found, press and
release Okay key to install the Code.
i. “WARTEN…” followed by “FERTIG” will be displayed and the remote will exit Setup and return
to normal operation.
Programming by entering the code
The 4 digit code for your brand can be found in the separate code list.
a. Turn on the device to be controlled.
b.
Press and hold Setup key until “CODE SETUP” is displayed (takes approximately 2-3 seconds).
c. Release Setup key.
d. Press and release OK key. “CODELISTE AUFR.” is displayed.
e. Navigate to “CODE EING.”. Press and release the OK key. “QUELLEN-TASTE” is displayed.
f. Press and release desired Mode key (TV, VCR, DVD, etc.). The Mode key is displayed along
with its currently programmed code.
g. Enter the 4-digit code number using the digit 0-9 keys.
h. On the 4th digit entry, “FERTIG” will be displayed and the remote will exit Setup and return to
normal operation.
If an invalid code is entered, “Code Error” will be shown in the
Falscher Set
display and the remote will exit Setup and return to normal operation. Code
17
COde- Set
Setup
Codeliste Set
Aufr.
Quellen- Set
Taste
Geraet? Set
TV
Warten..
Set
Admiral Set
00:00
Warten
..
Set
Fertig Set
Code Set
Eing.
Quellen- Set
Taste
DVD Set
Code 0768
Fertig Set
Code Set
Such.
Quellen- Set
Taste
Geraet? Set
TV
Funktion Set
Test.
Suchen… Set
TV
Fertig Set
Herstel.- Set
Codes
Quellen- Set
Taste
Geraet? Set
TV
Herstel. Set
Code?
Funktion Set
Test.
Suchen
..
Set
TV
Fertig Set
55415 BedienAnltg TeFu_Zweite Version 08.12.09 16:32 Seite 17
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telefunken TRC 850 - 8in1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telefunken TRC 850 - 8in1 in the language / languages: German as an attachment in your email.

The manual is 2,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Telefunken TRC 850 - 8in1

Telefunken TRC 850 - 8in1 User Manual - English - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info