Manual Telair Energy 2510b (page 12 of 40) (English)

688849

Zoom out

Zoom in

1/40

Energy 2510 B

Vers. 022

4.6 Auxiliary electric cable connection

All 3 auxiliary cables to connect are equipped

with a polarized connector.

One cable is necessary for generator operation,

while the other 2 are optional cables.

• Cable from the generating set to the control

panel (mandatory). It is included in the stan-

dard supply and is 5 metres long. Check that

its length is sufficient to cover the chosen rout

between the generating set and the control

panel. Optional cables in longer sizes are

also available.

After leading the cable through the cable out-

let block (Fig.11 Ref.1) connect the white

connector to the fixed connector (Fig.13 Ref.

9) provided inside the generating set, check-

ing that the plugging direction is correct.

• Cable from the generating set to the auxiliary

fuel pump and fuel tank reserve (optional).

From the three-pole connector (Fig.13 Ref.8)

it is possible to take two cables to supply

electric input to an auxiliary fuel pump; also

see paragraph 4.8.

From the same connector (Fig.13 Ref.8) it is

also possible to take the signal for tank fuel

warning; also see paragraph 4.10.

• Cable from the generating set to the auxiliary

battery charger (optional). From the bipolar

connector (Fig.13 Ref.6) it is possible to de-

rive supply for an RCB battery charge regula-

tor via two 4 mm

cables; also see para-

graph 4.11.1.

4.7 Electronic control panel connection

Choose your required position for the control

panel inside the vehicle and drill a 30 x 32 mm

rectangular hole. After letting out of the hole the

connecting cable coming from the generating set

(paragraph 4.6) connect the cable black connec-

tor on the back of the electronic control panel. Fix

the electronic control panel (Fig.14) by using 3 x

20 mm self-tapping screws, making sure that the

rear part does not interfere with other surfaces.

Apply light pressure to fix the plastic frame, until

the anchoring tabs click in.

4.8 Auxiliary (optional) fuel pump connection

If the distance that fuel must cover between the

fuel tank and the generating set is too long or the

tank is installed at a lower level than the generat-

ing set, the fuel pump installed inside the gener-

ating set may find it difficult to take fuel in from

the tank by suction. In this case, an auxiliary op-

tional fuel pump (code 00507) should be installed

as close as possible to the tank for easy priming.

Hello,
I can not get start on my Telair Energy 2510b. It seems to me that the fuel do not reach the "engine".
Fuel pump?

Det ser ikke ut som bensinen suges fra bensintanken. Kan dette være årsaken og evnt.hva må gjøres?
Jeg tatt service, skiftet olje, skiftet tennplugg og rengjort luftfilter.

mvh
Thor, +4795972210
thor@jemtland.no

Submitted on 8-7-2022 at 08:48
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Telair Energy 2510b in the language / languages: English as an attachment in your email.

The manual is 4,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Telair Energy 2510b Manual

Product: