688849

Telair Energy 2510b Manual

11
Zoom out
Zoom in
Previous page
1/40
Next page
Vers. 002
Energy 2510 B
GB
11
Always fit a 100 A fuse
onto the positive cable connecting the gener-
ating set to the positive pole of the battery.
4.5 Electric Load connection
To connect loads to the power generating set,
use a three-pole cable up to the applicable stan-
dards in force. The correct cross section is
shown in Table 1.
Table 1
Model
Sect. mm
2
line 230 V
Cable leng.
Lgth < 6 m
Cable leng
Lgth. > 6 m
2510B
2.5 10 16
LINE
CONNECTION 230 V
BATTERY
CONNECTION
For connection to the 230V input line, the gener-
ating set is equipped with a special terminal strip
(Fig.13 Ref.1) to which the cables must be con-
nected.
Use the special cable outlet (Fig.11 Ref.1) to
prevent water seeping into the generating set.
Although the generating set is equipped with a
special internal thermal cut-out to cut power de-
livery in the event of overload or short circuits
(Fig.13 Ref.5), it is advisable to install (in the ve-
hicle control panel) a thermomagnetic cut-out
switch, suitably set to stop power delivery to the
various users when current absorption exceeds
10.5 Amp.
If the generating set thermal cut-out switch has
been operated, press the button (Fig. 13 Ref. 5)
to restore closed circuit and power delivery con-
ditions.
Carefully check the posi-
tion of the line connection for picking up 230
Volt current. Wrong connection could dam-
age the generating set irreparably or create
dangerous short circuits.
… 11 …


Need help? Post your question in this forum.

Forumrules
1

Forum

telair-energy-2510b

Reset search

  • Hello,
    I can not get start on my Telair Energy 2510b. It seems to me that the fuel do not reach the "engine".
    Fuel pump?

    Det ser ikke ut som bensinen suges fra bensintanken. Kan dette være årsaken og evnt.hva må gjøres?
    Jeg tatt service, skiftet olje, skiftet tennplugg og rengjort luftfilter.

    mvh
    Thor, +4795972210
    thor@jemtland.no

    Submitted on 8-7-2022 at 08:48

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telair Energy 2510b at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telair Energy 2510b in the language / languages: English as an attachment in your email.

The manual is 4,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info