Manual Tel Sell M29171 SoloRyder (page 16 of 80) (English, German, Dutch, French, Italian, Polish, Turkish, Spanish)

783926

Zoom out

Zoom in

1/80

2. After assembling the product, position your hands and feet securely; 3 inclination positions are

possible.

3. After adjusting the position, carefully ensure that the locking pin is inserted through both holes.

ASSEMBLY

Step 1 (Fig. 2):

Unpack all parts, and remove all packing material. If anything is missing, please contact our customer

service (contact information can be found on the last page).

Remove the frame (1), place it on the ﬂoor and insert the locking pin (10) from the tool bag into the

corresponding hole, as shown in the illustration.

Note: Cardboard or another suitable protective covering should be placed on the ﬂoor under the frame

(1) and the front support tube (9) to prevent damage to the ﬂoor or the device‘s coating.

Step 2 (Fig. 3):

As shown in the ﬁgure, the carriage bolt (17) is passed through the front and rear stabilizers (2/3) and the

seal (19), and the cap nut (18) is attached to the frame.

Note: The front base shell has a moveable wheel that is not installed with the rear stabilizer.

Step 3 (Fig. 4):

1. Remove the handrail tube (6).

2. Insert the 4 Allen screws with hexagonal and half-rounded heads 8*37 (20) through the corresponding

holes in the armrest and frame (1), attach the seal (18) and the lock nuts (22) to secure the tool lock

(as shown in the ﬁgure).

Step 4 (Fig. 5):

1. Remove the monitoring device, and insert the batteries as shown. To do this, open the battery

compartment on the rear side of the display, and insert 2 x AAA 1.5 V batteries (not included in delivery

contents). Pay attention to the correct polarity.

2. Push the handrail tube, the handrail (6) and the plug of the heart rate monitor (28) through the opening

on the back of the device frame (1).

3. Now connect all cables an the back of the display with all cables that are in the frame.

Note: The screws behind the monitoring device/display are pre-installed. To assemble, remove the

screws on the back of the display, and then use them to mount the display on the frame.

Step 5 (Fig. 6):

1. Install the left pedal L and the right pedal R on the crank using a wrench.

Note: The left L and right R pedals face in the direction of the handrail and the foot straps are also

divided. (Fig. 6a)

2. There are three adjustment holes for the strap position, to allow adjustment as required. (Fig. 6b

M29171_SoloRyder_Manual_20210308_MM.indd 16M29171_SoloRyder_Manual_20210308_MM.indd 16 08.03.21 11:0108.03.21 11:01

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tel Sell M29171 SoloRyder in the language / languages: English, German, Dutch, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 3.01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tel Sell M29171 SoloRyder Manual

Product: