Manual Tefal FV5356 Aquaspeed (page 9 of 90) (All languages)

659504

Zoom out

Zoom in

1/90

Environment protection first!

i Your appliance contains valuable materials which can be recovered or recycled.

‹ Leave it at a local civic waste collection point.

PROBLEM POSSIBLE CAUSES SOLUTIONS

Water drips from the

holes in the soleplate.

The chosen temperature is too low and

does not allow for the formation of steam.

Position the thermostat in the steam

range (from •• to MAX).

You are using steam while the iron is not

hot enough.

Wait until the thermostat light goes out.

You are using the Power zone trigger

too often.

Wait a few seconds between each use of

the Power zone button.

There is too much steam. Reduce the steam.

You have stored the iron horizontally, without

emptying it and without setting it to .

See the section "Storing your iron".

The anti-scale valve is not fully inserted. Replace the anti-scale valve: press down

until it clicks into place.

Brown streaks come

through the holes in

the soleplate and

stain the linen.

You are using chemical descaling agents. Do not add any descaling agents to the

water in the water tank.

You are not using the right type of water. Perform a self-cleaning operation and

consult the section "What water to use?"

Fabric fibres have accumulated in the holes

of the soleplate and are burning.

Perform the self-cleaning operation and

clean the soleplate with a damp sponge.

Vacuum the holes of the soleplate from

time to time.

The soleplate is dirty

or brown and can

stain the linen.

You are ironing with an inappropriate

setting (temperature too high).

Clean the soleplate as indicated above.

Select the appropriate setting.

Your linen has not been rinsed sufficiently

or you are using starch.

Clean the soleplate as indicated above.

Always spray starch onto the reverse side

of the fabric to be ironed.

There is little or no

steam.

The water tank is empty. Fill the water tank.

The anti-scale valve is dirty. Clean the anti-scale valve.

Your iron has a build-up of scale. Clean the anti-scale valve and carry out a

selfclean.

Your iron has been used dry for too long. Carry out a self-clean.

The soleplate is

scratched or damaged.

You have placed your iron flat on a

metallic rest-plate or ironed over a zip.

You have cleaned your soleplate with an

abrasive or metal pad.

Always set your iron on its heel. Try to

avoid ironing over zips. Refer to the

chapter “Clean the soleplate”.

Your soleplate is

releasing particles.

Scale is building up on the soleplate. Carry out a self-clean operation.

Water is running out

of the water tank flap.

You have not closed the water tank flap

properly.

Check that the water tank flap is locked

properly.

Steam or water leak

from the iron as you

finish filling the tank.

The steam control is not set to the

position.

Check that the steam control is set to

the position.

The spray does not

spray.

There is not enough water in the water

tank.

Fill up the water tank.

If you have any problem or queries, please contact our Helpline:

0845 602 1454 - UK / (01) 677 4003 - ROI or consult our website - www.tefal.co.uk

If there is a problem

1800129037 FV53XX EO A11 XS_110x154 10/06/13 16:09 Page5

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tefal FV5356 Aquaspeed in the language / languages: All languages as an attachment in your email.

The manual is 4,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tefal FV5356 Aquaspeed Manual

Product: