Manual Tefal FV5356 Aquaspeed (page 7 of 90) (All languages)

659504

Zoom out

Zoom in

1/90

Before first use

•

Before using your iron with the steam function for the first time, we recommend that you operate it in a horizontal

position for a few moments, away from your linen. Operate the Power zone trigger several times under the

same conditions.

• There may be a release of smoke, a harmless odour and a light spray of particles when you use your appliance

for the first time. This has no effect on the use of the iron and will disappear quickly.

Preparation

What water to use?

• Your appliance has been designed to operate using untreated tap water. However, it is necessary

to operate the Self-Clean function regularly in order to eliminate hard water deposits from the

steam chamber.

• Never use water containing additives (starch, scents, softeners, etc.), or water produced by

condensation (e.g. water from tumble-driers, refrigerators, air conditioners, rain water). The types

of water contain organic waste or mineral elements that can cause spitting, brown staining, or

premature wear of the appliance.

Filling the water tank

• Unplug your iron before filling it.

• Set the steam control to – fig.1.

• Take the iron in one hand and tilt it slightly, with the point uppermost.

• Open the water tank lid – fig.2.

• Fill the tank up to the “MAX” line – fig.3.

• Close the flap of the water tank.

Use

Adjust the temperature and the steam

• Set the thermostat control – fig.4, referring to the table below.

• The thermostat light comes on. It will go out when the soleplate is hot enough – fig.5.

RECOMMENDATIONS

• Select setting and save 20% energy compare with the maximum position.

• Your iron heats up quickly: so begin by ironing fabrics that are ironed at low temperatures first, then go on to those requiring a higher

temperature,

• If you turn down the thermostat, wait until the thermostat light comes back on before beginning to iron again,

• When ironing fabrics with mixed fibres, set the ironing temperature for the most delicate fibre. For delicate fabrics we recommend

testing the fabric first on an inconspicious place eg (inside the hem).

Spray Function (spray)

• Whether steam or dry ironing, you are able to use the spray button to dampen laundry to remove

stubborn creases – fig.6.

Obtain more steam

• Turn the thermostat to “MAX” or “•••”.

• Operate the Power zone trigger from time to time – fig.7.

• To avoid drips, leave an interval of a few seconds between operations.

Fill the tank up to the “MAX”.

Never fill the appliance by hol-

ding it directly under the tap.

Do not remove the anti-scale

valve to fill the water tank.

If your water is very hard, it is

possible to mix tap water with

store-bought distilled or demi-

neralised water in the following

proportions : - 50% tap water,

- 50% distilled or demineralised

water.

= STEAM ZONE

In order to avoid water dripping from

the iron onto the linen:

- Turn off the steam when ironing silk

or synthetic fabrics.

- Set it at the minimum position for

wool.

Make sure that there is water in

the tank before using this button.

FABRIC

POSITION OF

THERMOSTAT CURSOR

STEAM SETTING

POSITION

LINEN

COTTON

WOOL

SILK / SYNTHETIC (Polyes-

ter, Acetate, Acrylic, Nylon)

MAX

•••

••

•

Description

1. Spray nozzle

2. Anti-scale valve release button

3. Anti-scale valve

4. Steam control

5. Water tank filler flap

6. Spray Button

7. Auto-Stop safety light (depending on model)

8. Electric power cord

9. Easycord system

10. Thermostat indicator light

11. Extra Stable heel

12. Power zone trigger

13. Thermostat control

14. Autoclean Catalys

Soleplate (depending on model)

Please read these

instructions care-

fully. Remove any

labels from the sole-

plate before heating

up the iron.

1800129037 FV53XX EO A11 XS_110x154 10/06/13 16:09 Page3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tefal FV5356 Aquaspeed in the language / languages: All languages as an attachment in your email.

The manual is 4,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tefal FV5356 Aquaspeed Manual

Product: