659504
8
Zoom out
Zoom in
Previous page
1/90
Next page
EN
DE
FR
NL
ES
PT
IT
DA
SV
NO
FI
EL
HU
CS
SK
SL
SR
HR
RO
BG
TR
UK
RU
PL
ET
LV
LT
4
Vertical steam ironing
Hang the garment on a hanger and hold the fabric slightly taut with one hand. The steam is very hot,
so you should always do this with the garment on a hanger never iron clothes which someone is
wearing.
• Set the thermostat control to
“MAX” fig.8.
• Operate the Power zone trigger by pulsing fig.7moving the iron from top to bottom – fig.9.
Dry ironing
• Set the temperature for the fabric to be ironed.
• Set the steam control to fig.1.
• You may start ironing when the thermostat light goes out.
Extra Functions
Autoclean Catalys
®
Soleplate (depending on model)
• Your iron is equipped with a self-cleaning soleplate which works by catalysis.
• Its exclusive coating helps eliminate all the impurities generated by normal use.
• It is recommended that you always stand your iron on his heel to preserve its self-cleaning coating.
Integral anti-scale system
Your iron is equipped with an integral anti-scale system. This system will help to provide:
• a better ironing quality with a constant flow of steam,
• lasting performance from your appliance.
Auto-Stop safety feature (depending on model)
• The electronic system cuts off the electric power and the Auto-Stop warning light flashes if the
iron is left vertically on its heel for more than 8 minutes, or in a horizontal position for more than
30 seconds – fig.10.
• To restart the iron, just move it gently until the warning light stops flashing.
Anti-drip function (depending on model)
• When the iron is no longer hot enough to produce steam, the water feed will stop automatically to avoid dripping.
Maintenance and cleaning
Cleaning the anti-scale valve (once a month)
• Unplug your iron and empty the water tank.
• Adjust the steam setting to “Eco”.
• To remove the anti-scale valve, open the water tank lid and press the release button fig.11 and then pull the valve upwards
fig.12.
• Soak the valve in a cup of white spirit vinegar or plain lemon juice for 4 hours – fig.14.
• Rinse the valve under running water.
• Replace the anti-scale valve; press until it clicks in to place – fig.15.
Self-cleaning
• Fill the tank of your iron with untreated tap water. Stand the iron on it’s heel with the
thermostat set to “Max” and heat it up.
• When the thermostat light goes out, unplug the iron and hold it in a horizontal position,
over a sink. Remove the anti-scale valve – fig.11-12 (see previous chapter).
• Shake the iron gently, over the sink, until some of the water in the water tank (with the impurities) has flowed out through the
soleplate – fig.16.
• At the end of the operation, replace the anti-scale valve; press it in until it clicks – fig.15.
• Plug the iron back in and leave it resting on its heel for two minutes to dry the soleplate.
• Clean the soleplate with a damp, non-metallic cloth while it is still warm.
Cleaning the soleplate
Your steam iron is fitted with a self-cleaning soleplate (depending on model):
• The exclusive active coating helps eliminate all the impurities generated by the normal
day-to-day use of the iron.
• However, if you iron using an unsuitable programme, some traces may be left which require manual cleaning. In this case, it is
recommended that you use a soft damp cloth on the warm soleplate, in order not to damage the surface.
Your steam iron is fitted with an Ultraglide soleplate (depending on model):
• Clean the soleplate with a damp, non-metallic cloth while it is still warm.
Storing your iron
• Unplug the iron and wait for the soleplate to cool down fig.18.
• Empty the water tank and set the steam control to . A little water may remain in the tank.
• Wind the cord around the heel at the back of the iron. Store the iron on its heel fig.19.
Hold the iron a few centimetres
from the fabric to avoid burning
delicate fabrics. Every five pulses
return the iron to a horizontal po-
sition.
The auto-stop light will be lit du-
ring normal use!
Be careful! - Never touch the end of the
valve – fig.13.
- The iron will not function without the
anti-scale valve.
The self-cleaning function helps to slow
down scaling in your iron. In order to ex-
tend the life of your iron, use the Self-
Cleaning function once a month.
Attention! The use of a scouring pad will
cause damage to your soleplate's self-clea-
ning (depending on model) coating – fig.17.
Never use aggressive or
abrasive products.
1800129037 FV53XX EO A11 XS_110x154 10/06/13 16:09 Page4
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tefal FV5356 Aquaspeed at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tefal FV5356 Aquaspeed in the language / languages: All languages as an attachment in your email.

The manual is 4,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info