801425

Techno line WS9008 Manual

14
Zoom out
Zoom in
Previous page
1/75
Next page
EN4
Press [TIME] key to enter the next setting.
The setting sequence: 12/24 format -> hour -> minute -> second -> year -> date-
month /month-date -> month -> day -> ± 23 time zone -> weekday language -> DST
AUTO/OFF
Press [TIME] key or leave the unit for 60 seconds to complete the setting and return
to normal mode.
Weekday language: EN -> FR -> DE -> ES -> IT -> NL -> RU
View time
In normal mode, press [TIME] key to switch between seconds and weekday display.
Alarm time setting and display
1. In normal mode, press and hold [ALARM] key for 2 seconds until alarm hour
digit flashes to enter alarm time setting mode.
2. Press [ UP / CH ] or [ DOWN / MOON] key to change the value. Press and hold
the key for quick adjust.
3. Press [ALARM ] key again to step the setting value to Minute with the Minute
digit flashing.
4. Press [ UP / CH ] or [ DOWN / MOON] key to adjust the value of the flashing
digit.
5. Press [ALARM] key to save and exit the setting.
Note:
In alarm mode, the “"icon will display on the LCD.
The alarm function will turn on automatically once you set the alarm time.
Activating alarm and temperature pre-alarm function
1. In normal mode, press [ALARM] key to show the alarm time for 5 seconds.
2. When the alarm time displays, press [ALARM] key again to activate the alarm
function.
Or press [ALARM] key twice to activate the alarm with ice pre-alarm function.
Once the ice pre-alert activates, the pre-set alarm will sound and alert light will flash
30 minutes earlier if the outdoor temperature is below -3°C.
When clock reach the alarm time, alarm sound will start. Where it can be stopped
by following operation:
Auto-stop after 2 minutes alarming if without any operation and the alarm will
activate again in the next day.
By pressing [ SNOOZE / LIGHT ] key to enter snooze that the alarm will sound
again after 5 minutes.
By pressing and hold [ SNOOZE / LIGHT ] key for 2 seconds to stop the alarm
and will activate again in the next day.
By pressing [ALARM] key to stop the alarm and the alarm will activate again in
the next day.
Note:
The snooze could be used continuously in 24 hours.
During the snooze, the alarm icon “ ” will keep flashing.
Wireless sensor signal receiving
The console display signal strength for the wireless wind speed 3-IN-1 sensor, as per
table below:
1. If the signal has discontinued and does not recover within 15 minutes, the
signal icon will disappear. The wind speed, temperature and humidity will
display “- -” for the corresponding channel.
2. If the signal does not recover within 1 hour, the wind speed, temperature and
humidity will display “Er” for the corresponding channel, if over 48 hours, the “Er”
display will become permanent. You need to replace the batteries and then press
[ SCAN ] key to pair up the sensor again.
View the outdoor channel (Optional feature for additional thermal-hygro sensors)
This console can pair with a wireless wind speed 3-IN-1 sensor and up to 3 wireless
thermal-hygro sensors. If you have 1 or more additional sensors, you can press [ UP /
CH ] key to switch between different wireless channels in normal mode, or press and
hold [ UP / CH ] key for 2 seconds to toggle auto-cycle mode to display the connected
channels at 4 seconds interval and the " " icon will show on the display.
During auto-cycle mode, press [ UP / CH ] key to stop auto cycle and display the
current channel.
Temperature and humidity trend
The Barometric pressure, temperature and humidity trend indicator shows the trends
of changes in the forthcoming few minutes. Arrows indicate a rising, steady or falling
trend.
Note:
If no signals are received or the transmission is interfered, “- -” will appear on the
LCD.
Relocate the console or transmitter in other positions and make sure the outdoor
sensor is within the effective range of 150m straight distance approx.
Alarm off
Alarm on
Alarm with ice-alert
No signal
Weak signal
Good signal
Trend
Arrow indicator
Rising
Steady
Falling
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Techno line WS9008 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Techno line WS9008 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info