Manual Techno line WS9008 (page 13 of 75) (English, German, Dutch, French, Italian, Polish, Spanish)

801425

Zoom out

Zoom in

1/75

EN3

No RCC signal received

Receiving RCC signal Receiving RCC signal

Alarm off

4. After 5 minutes channel searching, it will turn to DCF signal reception

automatically.

5. Radio Controlled function, the current time & date automatically synchronized

with the time signal transmitted from Germany (DCF77).

Note:

 If no display appears on the LCD after installing the batteries, press the [ RESET ]

key by using a metal wire.

 You may not receive the DCF77 and wireless sensor(s) signal immediately. Due

to the atmospheric disturbance, the best reception for DCF often occurs

during night time.

Install the table stand

The unit is designed for desktop or wall mount for easy viewing. The following step is

for table stand installation.

Step 1 Step 2 Step 3

Set LCD display viewing angle

Press [ DOWN /MOON] button in normal mode to adjust LCD viewing angle to fit

table stand or wall mount situation.

Use the LCD backlight

In normal mode, press [ SNOOZE / LIGHT ] button to turn on backlight for 5 seconds.

Pairing additional wireless sensor/s (optional)

This console can support up to 3 additional wireless thermo-hygro sensor(s). You can

press [ SCAN ] key to search the corresponding channel's sensor manually. Once

your sensor paired up, the sensor signal strength indicator and weather reading will

appear on your console display.

Note:

 The additional wireless sensor(s) is not included

 Select CH 1, 2 or 3 in the wireless sensor

 Please check the additional sensor's user manual for more detail of the

installation.

View multiple wireless sensor channels (optional)

1. In normal mode, press [ UP / CH ] key to switch the display between CH 1~3.

2. In normal mode, press and hold [ UP / CH ] key for 2 seconds to enter auto-

cycle mode, After a confirmation tone, it will alternately display the CH 1~3 at 4

second intervals.

3. During auto-cycle mode, press [ UP / CH ] key again to stop auto-cycle mode

and display the current channel.

Reception of radio-controlled signal

The time and date are radio-controlled. The current time and date are

automatically synchronized with the time signal transmitted from Germany

(DCF77).

When used for the first time (after inserting the batteries or pressing the [ RESET ]

key), the clock will start to receive the RC signal after 5 minutes with the signal

strength indicator flashing. You can also press [ RCC ] key to receive the DCF signal

once.

DCF77 signal reception icon

The signal indicator shows signal receive status. The signal receiving status

could be classified into 3 types:

Note:

 Every day the weather station will automatically search for the time signal at

2:00, 3:00 and 4:00 .

 Always place the unit away from interfering sources such as TV set, computer,

etc. Avoid placing the unit on or next to metal plate.

 Closed area such as airport basement, tower block or factory is not

recommended. Do not start reception on a moving vehicle or train.

 User can permanent disable or enable the RC function by press and hold the [

RCC ] key for 8 seconds. OFF appears when the function was disabled.

Daylight saving time (DST)

This clock has been programmed to automatically switch when the daylight saving

time is in effect. User can disable the DST function in time and calendar setting mode.

Note:

DST AUTO/OFF setting only available when RCC function is ON.

Time & calendar setting and display

Manual time & date setting

In normal mode, press and hold [TIME] key for 2 seconds to enter date and time

setting mode.

Press [ UP / CH ] or [ DOWN /MOON] key to adjust the setting.

No DCF signal received

Receiving DCF signal

Received DCF signal

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Techno line WS9008 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3.78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Techno line WS9008 Manual

Product: