486809

Technisat HD-VISION 40 PVR Manual

19
Zoom out
Zoom in
Previous page
1/72
Next page
or
> by pressing a numeric key from 0 to 9 on the remote control
or
> by turning a device on, which is connected to an external input. (During activated Auto-
start function, section 11) The operating mode is signalled by a green LED.
Turning the TV set off
> Turn the TV set off by pressing the mains switch on the device or by pressing the
On/Standby key on the remote control/on the set.
The TV set is in the standby mode, if it was turned off with the On/Standby key. The
LED display is red in this case.
> The TV set can be additionally turn off with the Autostop function (see section 11).
The device remembers, whether it was set to "On" or "Off", as entered with the remote control
or keys of the set.
If the TV set was turned off with the mains switch during operation, it starts up directly in the
operating mode after being turned on again with the mains switch.
The TV set should be turned off with the mains switch in case of electrical
power outage, so that it will not turn itself on again inadvertently.
6.2 Programme selection
6.2.1 With the Programme up/down keys
> You can move up and down through the programmes by one programme position res-
pectively with the Programme +/- key on the remote control/on the set.
6.2.2 By means of the numeric keyboard
> Enter the required programme number on the numeric keyboard.
For example:
1 for programme position 1
1, then 4 for programme position 14
2, then 3, then 4 for programme position 234
1, then 2, then 4, then 5 for programme position 1245
When entering multi-digit programme numbers, you have approximately three seconds time
after pressing a key to complete the input.
If you only want to enter a 1,2 or 3-digit number, you can accelerate the input procedure by
pressing the last number for a longer period.
6.2.3 By means of the programme list
> Press the OK key.
The programme list is now displayed. Only TV programmes are displayed in the TV
mode and only radio programmes in the radio mode. The currently set programme is
highlighted.
> By means of the arrow keys or numeric keyboard, you can now select the required
programme.
Move the marker by one line at the time through the list with the up/down arrow
19
EN
37779_HDvisionPVR_EN_.QXP 16.2.2007 9:21 Str. 19
Downloaded from www.Manualslib.com manuals search engine
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technisat HD-VISION 40 PVR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technisat HD-VISION 40 PVR in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info